Review on Gaming chair Zombie VIKING-6 KNIGHT, upholstery: imitation leather/textile, color: grey/black by Gabriela Okrent ᠌

I. Workmanship - 1. crooked seams, threads sticking out of the stitching, 2. stuffing material is disgusting - cheap, loose (for armchairs) foam rubber is cut anyhow, 3. during manufacture, the material is cut on the left side of the seat, then sewn by hand, 4. holes for fasteners in the chairs are made by cutting, not by punching! 5. cast right armrest with a defect in the tide - on the entire series of chairs - I will not post pictures before. II. The quality of materials - 1. the front nut in the lining on the left armrest with a defect in the thread, did not turn to the end, was treated with additional washers. 2. The seat foam was washed out after a year of operation, replaced with a denser one (left after the repair of the sofa). 3. A year later, the base of the seat - six-layer plywood cracked under the armrest fasteners photo 3,4,5,6,7 - the reason is extremely low-quality plywood, not glued and made of a rotten base. 4. The material for fastening the armrest to the harnesses - metal corners are made of soft, easily bending steel (there is a plus - they are maintainable because they straightened them with hands and pliers) photo 8.9. 5. armrest bolts sagged, but the steel there is also soft straightened with hammer blows. 6. the rolling mechanism is very tight (perhaps just for a 180 kg user?) III. Assembling a chair - when buying a chair on the Internet, it is quite possible to assemble it yourself, but you need to remember that it is assembled for the first time (it was not assembled at the factory), which means it must be assembled in tightness - with the bolts tightened a little at once from all directions, at the same time checking before quality of threaded connections - and this is a must!