Review on ⚡ C2G Power Cord - 90 Degree Right Angle, 6ft, Universal 3 Pin Connector - Cables to Go 03152 by Jason Connolly

I was able to replace this cable with a standard power adapter. I suspect HP anticipated this because the plug in the corner was sheared off by the socket's handle. The direction of the wire coming out of the socket on the insert must be at right angles. Because the height of the plug in the outlet is lower than other models of this plug, the rear of the printer can be placed further away from a shelf or cabinet. made it. Good airflow on top, bottom and sides, but now the back of the printer is flush with the back of the case. The front of the laser printer is 2mm away from the door, so there is no touching or collision and no interfering functions. Now you can close the glass front door and the printer will work. All you have to do is open the door to manually feed paper or labels through the bypass port. This reduced the gap by about 2 inches and allowed me to use a more attractive and functional cabinet to house the printer. For less than $10 I saved hundreds of dollars and got rid of the hassle of buying a new closet.