The vertical was satisfactory - the plumb line from the ceiling 2.80 high was all luminous. Horizontal - immediately upset. Tested according to the method that was in the instructions. Then I rummaged through the Internet and immediately found how to set it up. Since there was no serial number or brand anywhere on the case, there was nothing to lose. I unscrewed 5 screws and removed the cover. On the recommendation from the site, I tightened the necessary screw and everything is ok. Accuracy within 1 mm at 5 meters. And if only the central point beats in a straight line and even less - I look at the pencil marks in the center of the beam and its width is 2 mm. So now I'm happy with the accuracy. It remains to check the blockages of the edges of the plane. But by turning the gun itself, you can mark everything very accurately.
🔥 Advanced Testo Wireless Hot Wire Anemometer Technology
4 Review
🌬️ Advanced 3-in-1 Indoor Air Quality Monitor with CO2/RH/Temp Data Logging and Audible Alarm - NDIR Sensor Technology
8 Review
Portable Handheld Manometer 📏 for Accurate Pressure Differential Measurement
5 Review
🔍 Enhanced Precision with Backlit Professional Manometer for Differential Ventilation
6 Review