📺 ForGING MOUNT Height Adjustable Swivel TV Stand Table Top Base for 37-70" TVs - Holds up to 99lbs, VESA 600x400mm - Includes Tempered Glass Base, Bonus HDMI Cable & Adapter Review

The TV is tilted forward due to the wrong bracket. The TV also tilts to the right, but can be moved back to get closer to the plane. I have emailed the company twice and have received no response.

I have the same brand on a 43 and 65 inch TV. They are high quality and durable. Setting up the 65-inch monitor was daunting, but once it's on the stand it feels safe and secure. Very satisfied.

The positive reviews influenced my purchase of this stand and I'm glad they did. The unit is easy to install and is made of heavier materials than typically used for similar products. It assembled in minutes and fixed our TV with ease. I highly recommend this product.

We needed a very low bracket to mount a 70" TV to clear the bottom shelf. We eventually found a combination of settings that worked, but we had to remove the rubber feet and apply some pressure to the TV to get it under the shelf's edge. But we did it. A good product. The installation height range is too limited. However, you can expand this area with a drill press.

I bought this with a little initial skepticism as to whether it wouldn't be able to support the weight of my 60" Panasonic Plasma for more than 70 pounds). Surprisingly stable I wish it could swivel a little more (list says 30 degrees, manual says 25 degrees) but at the end of the day the limiting factor is more TV slamming into the wall than the limit of the stand.

This was a great alternative to wall mounting my 55" TV or buying furniture long enough to match the length of the TV. I don't have a lot of space and was able to use my old TV cabinet instead of buying a new one that doesn't get in the way. The range of motion is good and smooth and it needs to be installed very easily.

We needed a very low bracket to mount a 70" TV to free up the bottom shelf. We eventually found a combination of settings that worked, but we had to remove the rubber feet and apply some pressure to the TV to get it under the shelf's edge. But we did it. A good product. The installation height range is too limited. However, you can expand this area with a drill press.

Bought this with a little initial skepticism as to whether it would be able to support the weight of my 60" Panasonic plasma (there's no lightweight 70lb TV here). The stand handles that lightly and is surprisingly stable, I wish it could rotate a little more (the listing says 30 degrees, the instructions say 25 degrees) but at the end of the day the limiting factor is the TV slamming the wall rather than the border of the booth.

This was a great alternative to wall mounting my 55" TV or buying a piece of furniture long enough to fit the length of the TV. I'm short on space and could use my old TV cabinet instead of buying an unnecessary new one that gets in the way. The range of motion is good and smooth and it was very easy to set up. I made it myself, lots of mounting hardware is included to suit your needs.

This definitely holds my Samsung Q70 65 inch LED TV in place without moving except spinning. Gives enough boost to fit my stereo AV receiver. The hardware comes with lots of gaskets and screws. That being said, unfortunately one of the bolts I had to use was welded on the top so I couldn't tighten it properly. But I managed quite well. And the instructions are very simple, so you can decide where to put the parts, which gaskets and bolts to use, and which washers to put where. Oh, and the handy