VIVO Mount VESA Adapter for Acer Monitors: Models G206HL, G206HQL, G236HL, G246HYL, G247HL, H226HQL, H236HL, H276HL, S220HQL, S200HQL, S230HL, S240HL, S242HL, MOUNT-AR02 — Enhance Your Monitor Setup Today! Review

This adapter is advertised as fitting the Acer H236HL, but is more of a universal adapter and does not actually replace the existing stand. You just remove the base plate from the stand and then use your existing monitor stand and some very flimsy screws to mount the monitor on a very unstable platform. with standing desk adapter and monitor arm. If you're an average height like me at 5ft 8in, the monitors are too tall when seated to look directly at them from an ergonomic position without…

If you're ordering this for a G226HQL monitor and your screw that attaches it to the stand has a short thread it won't work. If you order it for the S230HL you can get it to work but not sure if it will last if you move the monitor around a lot. I had to remove the piece of metal that the thumbscrew goes in, place it on the outside of the bracket, and thread the screws through it into the plastic bracket. It is not possible to install the metal piece that goes into the back of the monitor and…

This review focuses on the installation and operation of the ACER S230HL. nice feature. Second, a decent mount with some installation tweaks. The instructions say to use the center screw from my base plate and use the included black washers in the center hole as needed. I went a little further and removed two small screws from the mounting hole, added some washers and inserted them into the base of this plate for extra strength (see pictures). The mountain is going nowhere. DSUB port (DB15) has

I am using this plate with a Dell adapter plate to install an Acer S230HL monitor on a Dell stand. I'm a tall guy so my monitor needs to be quite tall for ergonomics. This adapter plate mounts the monitor fairly high, and the Dell stand I'm using was designed for a 27" monitor, so it's pretty tall too. I understand this adapter wasn't designed for something like this, but it works great. Dell stands are some of the best out there and we had several spares at home. My monitor is about 8 inches…

Received my kit today. I can confirm that I have a G226HQL monitor and I can confirm that this mount will fit one of those monitors, but there aren't really any parts that allow this to happen. First of all, I was missing the M6 washer that is listed in the content. But they included 4 M4x12 thumbscrews, which is odd because I don't really need them. The washing machine probably wouldn't help if it was on; The screw that attaches the monitor legs to the monitor only has a couple of engagement…