Wall bracket RME K-320, black Review

I don't know how to attach it to the TV. on Xiaomi 42 inches, the elements that are attached to the TV are short. it is possible to fix only on the top bolt. and the bracket itself, which is hung on the wall is very small. if you fix it, then know that you can no longer move the TV to the left / right,

I bought it for the house, hung it up and began to tighten the pain for fixation, and the metal shrank like paper. and now barely holding on.

I was a little mistaken, I thought the size was normal, it turned out to be a promotion - a fiction and the size is proportional to the price.

Good for your money Different pros: The main advantage is the price! Simple bracket with fastening up to 200 by 200mm. Has cons: That spontaneously did not bend, I had to replace the plastic spacers (bushings). Just dialed the thickness with suitable M8 nuts.

If you settle for a TV that is only 24 inches wide, then it will be sufficient. When you tilt the TV, you will find that tightening the locking screws is a very inconvenient process. The metal used in this design is extremely thin; consequently, when the television is mounted at an angle, it is not possible to fix the desired angle of inclination. Furthermore, the plastic bushings that are supposed to fix the bracket in a given position cause the metal of the brackets to bend, and since there…

I took a bracket for a Samsung TV 43 diagonal. It is written that it fits 43. Too thin metal frame! Easy to bend! The bolts for mounting the TV according to the passport are m 8, and the holes in the bracket for the m6 bolts, that is, you need to drill! Included are screws for fixing the frame to the wall with a cross screwdriver and a cone head like on a screw, but it should be a straight turnkey! The bracket is suitable for a diagonal of 32 no more!

Different pros: It is easily fastened to the lining, a convenient thing for a 32-inch TV set, it still leans not bad! Its cons: It seemed to me a flimsy tilt mechanism, as if the TV set would fall off and fall to the floor, but so far it is holding on!

Has some pros: - Price - Tiny size to hide a smaller TV/monitor - Tilts, albeit a little With its cons: - Pretty thin material. The whole structure looks very flimsy. - No level built into the bracket to hang evenly. Have to use a third party tool

The kit included 4 and 6 mm bolts for the TV. Dowel 8x50. Self-tapping screws for fastening to the wall only for a screwdriver, they were hardly screwed in.

Screws for fastening to the wall for a straight (not Phillips) screwdriver. Since I will hang a 50-inch TV, I will replace both the dowels and the screws. Delivery was late for a day, but it was not urgent for me. So I have no complaints.

I ordered a bunch of coffee and this bracket in one day. Coffee was brought quickly and without problems, but here . The first day - the driver calls that I will be in 10 minutes. Ready to take on a heavy load? - stop, boy, there's a bracket! Exactly. I'm taking the washer back. Tomorrow they will bring you The second day. The driver at the entrance is looking for an assistant to. Remove the washing machine from the back! Managed to stop him. The second time I write to no avail in support…

If you take for a small TV (24 inches) then it will do. It is extremely inconvenient to tighten the locking screws when tilting the TV. The metal of this design is very thin when mounting the TV at an inclination, it is not possible to fix the desired angle of inclination, the plastic bushings that should fix the bracket in a given position flatten the metal of the brackets bend, while there is no hint of normal fixation, the system had to be finalized with 2 bolts and 6 nuts to secure…

Pros: Lightweight metal bracket. For this price it is quite normal. The kit includes two types of screws for mounting to the TV M4 and M6. Has cons: Of the shortcomings, I will take the only thing that one of the bolts was missing a nut. But this is a question for the manufacturer.

Extremely inconvenient fastener design. If you take this bracket, be prepared that you will need a very long cross screwdriver. It is almost impossible to fix the locking bolts with a simple screwdriver or tighten them by hand.

Thin metal bends by hand Nuts are glued on one nozzle of the tack There is no penetration Half of the thread has been cut off on the screws

If you do not know how to hang, the instructions will not help you. Bolts included for M6 only. Drilled under M8. I bought the bolts separately, only M6 is included. In addition, I inserted nuts for 6. The dowels are not 8x50 as in the kit, but 10x60 - but they will hold tighter. There is very little space to tighten the fixing bolts, do not crawl at all from below ((

Got pros: Good thick steel, not chinese foil Hung up in 15 minutes, no problems Some cons: The method of tilt control is questionable (by tightening two long bolts), but apparently for the sake of lowering the price

It is easy to assemble and fasten - dowels, self-tapping screws and bolts - everything is included (although self-tapping screws are under the "-" and not a cross) I would not use 40-43 "for a TV, because very thin and soft metal, bends even with your fingers. For me, 32" is normal.