💪 Upgrade Your Toilet with the American Standard Champion Kit 241 F/Close Coupled Champion 2 PC Review

All parts in this kit were OE quality and fit perfectly on this 2018 model Champion 4 with tank 4266. Instructions were clear. Of course I also bought a valve kit 738565-424-0074A and a new FluidMaster water regulator (float), hose and lever. ALL gaskets and other fittings in this tank are new. Just like a plumber would. And of course it stopped the annoying, infrequent refilling of the tank. I'm convinced that in my case the nut that attaches the flush valve kit to the tank wasn't tight…

Items arrived quickly and fit perfectly. I tried to reuse old parts after having to pull the Champion 4 out to replace the case gasket. Big mistake. One of the tank gaskets to the bowl leaked when I put them back in, so I ordered a new set. All parts were exactly the same as the original except the screws were stainless steel and not brass. Brass wouldn't be a problem, but it's nice to see something that lasts. A limitation. The cistern gasket to the bowl is quite thick (like the original when…

The Champion series requires extra tight bolting of the tank to the base. Etosi lowers the tank to a raised rib at the front and a raised ledge at the rear of the base to prevent the tank from rocking. It also compresses the large gasket that covers the water holes between the tank and bowl and compresses the damn rubber shank washers that sit under the bolts. After tightening the screws, they shrink to about half their thickness, so don't try to reuse them. and align as much as possible and…

I purchased an American Standard Champion 4 toilet to replace a 1981 toilet in a 4 bathroom home. I was disappointed that after 2 years it had a reservoir leak, none of my old toilets leak. A small basin made it possible to delay repairs by 4 years. This is tedious work, so I recommend you buy all the usual "maintenance" items. Before you begin, turn off the water in the bowl and rinse it out. Note the low water level in the tank and wait an hour. If the valve in the toilet wall is leaking, it…

Absolutely no, 100% NO THIS IS NOT SUITABLE FOR CHAMPION 4! The photos show the difference between the Champion 4 pad (green) and this kit's pad (black) as well as what I had to purchase to fix the cause of this kit. The gasket from the kit is definitely thicker. The screws in the kit are also brass instead of stainless steel in the original toilet. Other reviews have mentioned this as well. I was too angry to write this review in January when I bought it and it disappointed me, but I've had…