Header banner
Revain logoHome Page
๐Ÿ”ฌ 32 oz environmental molding and casting material - technology 32032 logo

๐Ÿ”ฌ 32 oz Environmental Molding and Casting Material - Technology 32032 Review

9

ยท

Very good

Revainrating 4.5 out of 5ย ย 
Ratingย 
4.4
๐Ÿ—ฟ Sculpture Supplies, ๐Ÿงถ Crafting

View on AmazonView on ะฏM

Media

(1)
img 1 attached to ๐Ÿ”ฌ 32 oz Environmental Molding and Casting Material - Technology 32032

Description of ๐Ÿ”ฌ 32 oz Environmental Molding and Casting Material - Technology 32032

Fast Cast is a two component urethane casting resin, which turns white once set. Easy to use, 1:1 Ratio and is odorless. Ideal for casting, prototyping, miniatures, models, taxidermy and more. Sets to a hard cast in approximately 10 minutes at 70 degrees Fahrenheit. Once cured, it can be drilled, sanded, shaped and painted.

Reviews

Global ratings 9
  • 5
    6
  • 4
    2
  • 3
    0
  • 2
    1
  • 1
    0

Type of review

Revainrating 5 out of 5

Quick Cure: Sculpture Supplies

This material gets very hot when curing so take care of your hands, it cures very quickly and has great strength once fully cured.

Pros
  • Superbly Done
Cons
  • Weak Set

Revainrating 5 out of 5

Cures very quickly when crafting

Follow directions or it will set before you pour. I worked in small batches and made 50 pieces in a few hours!

Pros
  • Handy item
Cons
  • Boring packaging

Revainrating 2 out of 5

You get 2 16oz bottles for a great price!

It must be called an AMAZING ACTOR! Works great and because it's liquid unlike clay, it gets into every corner of the mold. Use siccirs for cutting.

Pros
  • Doping ๐Ÿ”ฅ
Cons
  • Some cons

Revainrating 4 out of 5

READ THE INSTRUCTIONS. And have fun with it!

This stuff is great to work with, but you have to read the instructions, mix well and work fast. It is odorless, accepts powder and liquid shades well. Keep your molds clean and you'll get a beautiful surface finish.

Pros
  • Pretty impressive
Cons
  • New competition is here

Revainrating 5 out of 5

Excellent, quick resin for crafting

Very easy to work with and pour resin very quickly. You definitely can't linger after you've mixed the resin as it will start to harden and heat up on you very quickly. Learned this lesson the hard way the first time. Holds color very well after drying.

Pros
  • Finally bought
Cons
  • For pensioners

Revainrating 5 out of 5

Great perfection!

A very easy recipe in half. It dries very quickly and I like that it's white. Great for soaking up food coloring! 3 drops of red make a beautiful shade of pink. Because it cures white, it doesn't produce bright colors like red, but with a few drops of food coloring, it creates nice lighter pastel shades.

Pros
  • Cool
Cons
  • Matching

Revainrating 4 out of 5

Great product provided it is shipped unused/damaged.

I have purchased this item several times and it has been in the same condition several times. This is a great product if you get the undamaged and unused version. I'm just not sure why they think it's ok to ship it in this condition.

Pros
  • Easy to use, 1:1 ratio and odorless
Cons
  • Expensive

Revainrating 5 out of 5

Good and bad

I've used a lot of different products. It was probably a little better than the slick 300s, but it has its downsides. Doesn't take color well. Also a bit brittle after treatment. In general, if you just make something at home, it's fine. If you are in business I would pass.

Pros
  • Cures in about 10 minutes at 70 degrees Fahrenheit
Cons
  • Ugly packaging

Revainrating 5 out of 5

Really good product.

This resin gets hot pretty quickly, I recommend disposable gloves. It helps with heat as well as overflow or clutter. I had no trouble getting the resin out of the mold (I used a mold release spray and followed the instructions on the bottle). At the 10-14 minute mark my resin pieces could be taken off and then hand shaped a bit since they were still pliable. It made him better. All in all, it's a lot of resin for the price. I managed to get 56 small and medium casts plus several dime sizedโ€ฆ

Pros
  • Great for casting, prototyping, miniatures, models, taxidermy and more
Cons
  • Some little things