Header banner
Revain logoHome Page
πŸ”Œ arduino compatible cqrobot dmx shield with max485 chipset (rdm capable) for dmx512 network integration, led/music remote device management, and extended dmx master capabilities logo

πŸ”Œ Arduino Compatible CQRobot DMX Shield with MAX485 Chipset (RDM Capable) for DMX512 Network Integration, LED/Music Remote Device Management, and Extended DMX Master Capabilities Review

7

Β·

Excellent

Revainrating 5 out of 5Β Β 
RatingΒ 
5.0
πŸ–₯️ Desktop Barebones, πŸ’» Computer Components

View on AmazonView on Π―M

Media

(4)
img 1 attached to πŸ”Œ Arduino Compatible CQRobot DMX Shield with MAX485 Chipset (RDM Capable) for DMX512 Network Integration, LED/Music Remote Device Management, and Extended DMX Master Capabilities
img 2 attached to πŸ”Œ Arduino Compatible CQRobot DMX Shield with MAX485 Chipset (RDM Capable) for DMX512 Network Integration, LED/Music Remote Device Management, and Extended DMX Master Capabilities
img 3 attached to πŸ”Œ Arduino Compatible CQRobot DMX Shield with MAX485 Chipset (RDM Capable) for DMX512 Network Integration, LED/Music Remote Device Management, and Extended DMX Master Capabilities
img 4 attached to πŸ”Œ Arduino Compatible CQRobot DMX Shield with MAX485 Chipset (RDM Capable) for DMX512 Network Integration, LED/Music Remote Device Management, and Extended DMX Master Capabilities

Details

BrandCQRobot
CPU ManufacturerVIA
Screen Size0.01 Millimeters
ColorArduino-DMX Shield

Description of πŸ”Œ Arduino Compatible CQRobot DMX Shield with MAX485 Chipset (RDM Capable) for DMX512 Network Integration, LED/Music Remote Device Management, and Extended DMX Master Capabilities

The DMX-shield is an easy way to use the Arduino as a DMX-Master device, It is an add-on (or "shield") for the Arduino,just by adding the DMX-shield on the top of the Arduino. This DMX / RDM Shield is a low cost high quality solution that allows you to connect your Arduino driven artwork into DMX512 networks. The shield is populated with high quality NEUTRIK XLR 3pin Connectors (1x male and 1x female). The MAX485 based shield can be used as DMX Master, Slave and as RDM transponder.A unique RDM device id will be handed out from out range to you as well, this will make your device worldwide unique. Do not need to buy expensive equipment for loading protocol change, Equipped with high-quality NEUTRIK 3-pin plug, Ensure a reliable connection with other music devices.

Reviews

Global ratings 7
  • 5
    7
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    0

Type of review

Revainrating 5 out of 5

works well but not isolated

This works well for Chauvet DJ Followspot 400G control. The headlight has a manual mode, but this uses buttons to increase and decrease the brightness in large increments. There is no fine control. I wired this up using an Arduino Uno and a couple of potentiometers. This allows for much more precise dimming control. This is a low level DMX interface as it is not isolated. Since there is only one element in my DMX chain, I didn't think about it. It would not be safe to use it in a larger…

Pros
  • Satisfied so far
Cons
  • There are new competitors

Revainrating 5 out of 5

Works well in computers and accessories

Seems to be working fine. It's a bit inconvenient to move the jumper every time you want to upload new code to the Arduino, but it's probably better than the alternative.

Pros
  • Everything is fine!
Cons
  • Repair

Revainrating 5 out of 5

Good board, here are some useful tips

Good quality sign. I had an issue with corrupted output that turned out to be a library issue with the DmxSimple library. If you use this library, make sure you put: pinMode(2,OUTPUT);digitalWrite(2,HIGH);into setting void setup() so that it is passed correctly. Or set pin D2 low for receive. It's just that dmxserial works fine with this library, but you cannot use the serial monitor functions with this library unless you have an Arduino Mega and have configured the library to use other serial…

Pros
  • Good build
Cons
  • Will write later

Revainrating 5 out of 5

Easy DMX connections

Worked well for me to drive 4 LEDs. The only thing I did was toggle the EN jumper on and off to allow programming as the serial port cannot be active at the same time for DMX and USB programming. Stick a piece of tape on it to take it easier. The MAX485 chip is certainly a lot cheaper than the board, but you're paying for the convenience of being able to just plug in the Arduino and play, rather than rolling your own. blackboard or layout. I used the Arduino Create web console and just used the

Pros
  • Absolute legend
Cons
  • Long wait

Revainrating 5 out of 5

Nice board, here are some useful tips

Good quality shield. I had an issue with corrupted output that turned out to be a library issue with the DmxSimple library. If you use this library, make sure you put: pinMode(2,OUTPUT);digitalWrite(2,HIGH);into setting void setup() so that it is passed correctly. Or set pin D2 low for receive. It's just that dmxserial works fine with this library, but you cannot use the serial monitor functions with this library unless you have an Arduino Mega and have configured the library to use other…

Pros
  • MAX485 based screen can be used as DMX master, slave and RDM transponder. A unique RDM Device ID will also be issued to you from another realm, making your device unique in the world. .
Cons
  • weak

Revainrating 5 out of 5

works fine but not isolated

Good for controlling Chauvet DJ Followspot 400G. The headlight has a manual mode, but this uses buttons to increase and decrease the brightness in large increments. There is no fine control. I wired this up using an Arduino Uno and a couple of potentiometers. This allows for much more precise dimming control. This is a low level DMX interface as it is not isolated. Since there is only one element in my DMX chain, I didn't think about it. This would not be safe to use in a larger installation…

Pros
  • The DMX Shield is an easy way to use the Arduino as a DMX master device. This is an add-on (or "shield") for the Arduino by simply adding a DMX shield to the top of the Arduino.
Cons
  • High price

Works well once you figure it out. The documentation is rather sparse. The product description has a link to the wiki, and the last link on the wiki page is to the user manual, which is still pretty sparse but was the best source of information I found. I used their library to start with. It's called dmxlibraryforar and referenced in the user guide. It's not in the Arduino Library Manager. The problem with this library is that it uses the Arduino serial port to communicate with the shield. It's

Pros
  • This DMX/RDM sign is an affordable, high-quality solution for connecting your Arduino-controlled artwork to DMX512 networks.
Cons
  • Little things