Customize Your Ride With HTTMT TRHB114E-25 Motorcycle Black 1" Spike Handlebar Grips Throttle Boss Compatible With Harley And Kawasaki Models Review

Look great and feel great but didn't fit very well. I ordered the correct size but my old original grips that were falling apart used bar end plugs to hold them on and these just slide on and grip on but the left side started to slide off in the heat and the throttle one started to twist on the plastic Insert. I had to glue the throttle one and I had to 3D print a 2mm sleeve for the left to go inside and keep it from moving because glue wouldn't even hold it.

Nice grips minus the fact that I had to glue the throttle grip to itself to keep from rolling around and to keep the rubber in place.

I absolutely love these grips. I have 12" mini apes on my 04 Honda shadow aero 750. They feel great, the only down side is they were a little tight over the handle bars, So I added some heavy grease and now they slide perfectly

Came in on time but when installed I had to glue the rubber back to the handle grips because the glue they used was not working

They look and feel great but they were not to easy to install on a 2017 HD Roadking custom i had to glue the left side on it doesn't fit lime the original grips do.

Installed on my Iron 1200. Looks great and matches the bike great. They feel 1000 times better than stock. Saw many reviews about the grip edge not fitting the H-D housing on the clutch side. This grip is Not designed for that. It does not go in the housing. it’s stays flush with the housing just like the throttle side! You will need glue on the clutch side to keep it firm but that’s about it!

Is confy and look great, unfortunately the hot glue is not the best choice for a bikes piece as it strat to weaken at hight temperatures.However looks great is cheap, and makes the job.I if you can solve the sliding hot glue issue is a good buy

This would be a 5 star product if a better quality adhesive was used. The chrome part slid right off the throttle tube with little effort. It is a good product but grips will probably need to be reglued.

I ordered these for my 2001 Kawasaki Vulcan Nomad. The fit is good, the materials are lasting. I would by these again if needed---but I think they'll outlast my ownership of the bike.

Well I like the product over all but it came with glue stuck on the inside so it wouldn’t act as a throttle because it would get stuck. The throttle side the hand rest the problem with that is, that when using the throttle it spins the rubber and chrome on top so that you can’t even use the hand rest because it ends up on the other side we’re you can’t use it. The top part of the throttle the chrome and the rubber cane off the piece that connects to the throttle. I was trying to keep it on…

Make sure that you have a knife that’s long enough to cut the "over rubber" of the rubber that’s built-in. That's my review.

Came with a throttle sleeve, but that did not work with my bike. When i put my own throttle sleeve in, i cant get the rubber pieces to all stay in the metal body

I really like the design of the Chrome /rubber handgrips, the cruise paddle is a nice feature which is adjustableand can be removed if you want! My grips came with a bit of silicon glue inside the throttle side, making it twisthard , but cleaned it out with brake cleaner, for the great price can't complain at all .

These grips were easy to install and look real good on my Yamaha Warrior. But that's when the problem started. First the throttle started sticking will not turn smoothly in the throttle box. Second, the hand grip spun on the throttle and pulled right off the throttle during my ride. Now I have to go to my local cycle store and buy glue to try to put it back on. I ask a mechanic about it sticking he suggested try sanding it down a little.

Like most of the reviews state, when installing on harley 1in bars the right hand side fits perfect but the left hand side does not fit into the controls. I found the best way after trying to bench grind the ridge down was to just cut it flush behind the ridge and glue the grip on. Be sure to take the rubner inserts out while cutting or grinding. Other then that no complaints, comfortable grips and my hands fall asleep less on long rides.

The grip for the throttle was not glued right so it moved on its own when rotating. Had to remove and reglue & one of the small screws that attache the end cap stripped with minimal pressure. The install wasted my time, I don't recommend.

Look amazing and way more comfortable than stock grips despite other reviews had no issues with install or fitting no alterations. Like most aftermarket grips the clutch side needs to be glued on with grip glue as they aren’t made to utilize the left grip holder. All in all very pleased

Love the grips. Look good on bike. Decided to take to a bike shop and have both sides glued. Throttle glue doesn't hold, If you buy these grips, get glue for them. Adjust palm rest on grip to your liking.

The grips were nice and felt good in the hand but fitment was lacking. Grips turned freely until.it was slid on about three quarters of the way then it got tight and would not turn freely after mutiple attempts to make cable adjustments. Ordered for a 2005 Harley Dyna.

I have a 2004 Honda Shadow Sabre with 1" bars. These are a great replacement for the junk grips that were there before. I recommend loosening your throttle cables all the way before installation and prepare to loosen your handle bars. But, taking he bars loose gives you a chance to set a comfortable riding position. I've been riding for 5 years and I love these grips. I'd recommend to a friend and or buy again for another bike!