Sena ES0003001 Smh10 Clamp Helmets Review

Perfect match for my Bell DLX helmet. There is very little bass in the sound, but I guess that's to be expected as the bike's rumble will drown it out anyway. I used velcro from my Sena SMH10 and it came together in 10 minutes. If it fits your helmet, take it.

Works with SMH10 and 10S. I used this as a second setup with my open face helmet. The sound quality is not as good as the 10S, but it is suitable for communication. I wouldn't recommend it if you're looking for quality music. Speaker and microphone are not muted.

I upgraded from the Standard Qualifier to a DLX MIPS Qualifier. You'll have to buy a dedicated DLX mic, which costs $30 from Revain, but it's very easy to install and the built-in Bluetooth looks a lot more customized and cleaner than the Sena SMH10 found in a standard Qualifier helmet is.

Essential when connecting a SENA SMH10 or 10S intercom to a Bell Mag-9 helmet. 5-minute installation, customized and clean appearance. While the speakers are of lower quality than the newer 10S, that might be the difference between a 3/4 and a fully modular helmet, but this mic/headphone mount is just what Bell Mag-9 owners should have.

This kit is a great upgrade for your Bell Mag 9 helmet if you have SENA SMH10 Bluetooth. I've used this combo before without the kit, with an all-in-one clamp that worked well, but I didn't use the helmet's built-in adjustment for this setup. Installing this kit makes the combination much cleaner. However, it should be noted that some foam must be removed to install the kit.

As you would expect as it was made specifically for the Mag-9 as well as the Qualifier DLX (which I installed it on) it fits very well. and allows you to clean install Bluetooth on the helmet. The bonus is that it can be purchased separately and not just in the kit. The newer Sena 10S fits and is also designed for the SMH-10, so you can buy the 10S and install it on the Qualifier DLX just like the SMH-10.

It works and does what it's supposed to, but the fit isn't as good as advertised. I was expecting it to be tight, but heck it's a struggle to put SENA on a helmet. I have to use 20-30 pounds of pressure to connect the device to this mount. This is a combination of a Bell helmet and binding. I will not buy these helmets again. It doesn't matter because the wind noise is just as bad as the standard mount on my other helmet.

This Sena adapter fits my Bell Devil May Cry helmet perfectly. It was a snug fit as it is very difficult to fully seat the top clip of the Sena unit into the helmet once the adapter is installed, but after some adjustment I was able to snap it securely into place. If it doesn't, hit a good one and it will fail. It also didn't come with a mounting screw to attach the adapter to the helmet, so I had to find one at a hardware store. There is also no double sided tape to attach the speakers to the…

The clip fits the helmet well but the Sena device will not snap into place. I can get it to snap into some parts of the setup, but when I screw it in or put the gasket back in, the device pops out! I found another person on the net with this problem and he said a rep helped him and it's just that a lot of them don't work in the qualifier/10 combination. I'm going on a 1000+ mile trip in 4 days and I'm really annoyed that it just doesn't work. I just want to get a new helmet so I don't have to…