🚗 Efficient Auto Drain: The Barker Valterra-Bristol Model Review

Installation took about 1/2 hour. Started by installing the motor on the mount. Then he unscrewed the handle on the valve and screwed the bracket with the motor to the valve with the available screws. Finally, an adapter is screwed on, which actuates the valve with the motor. The electrical part wasn't that easy as the wires aren't very long. About 4 feet long. I had to splice and add another 5 feet of wire so I could place the switch on the compartment door. Also, cable routing has been added…

Monkeys built my Coachmen bel grande Five wheel camper trailer. Some of the things they did to him were idiotic. A good example is the placement of the holding tank controls. They are mounted in inaccessible places, not yet under the trailer. Double evaluation of the word DUH. Why don't so many people realize that maintenance is NOT the same as repair? They use a plastic rack and pinion to control the valve. The first block broke about 6 weeks after installation. This is so common that a WOMAN…

This unit arrived on time and took about 2 hours to install in total. I installed it on the gray water tank and routed the wiring inside next to the water level gauges. We installed a washer dryer and wanted to be able to drain the gray water without having to run outside to drain. I didn't want to install black water as I want to be close to the drain hoses when draining in case there is a problem. I had enough wire in the included harness to get to my switch. The valve assembly is simply…