Effortless Wire Crimping with Ferrule Crimping 💪 Tool Kit and 1900pcs Wire Terminals Crimping Connectors Review

All the images shown on the Revain website are crimping pliers with screws (like the red arrowed image I uploaded). However, I have a rivet gun and No bolts. (as in Fig. 2). It is possible to use pliers for the occasional DIY project instead of professional pliers. 1 star because the product is not as pictured.

Received the chips and tips set and was impressed with the case and packaging. The tool itself is good for the price. One of the plastic grips seemed a little loose on the one I received, but this did not affect the performance of the crimp. The cleaner has a ratchet and release lever if you need to manually detach it from the tip. I tested the tool on one of the small gray jacks that come with the kit. The crimp was good. I hope the tool lasts a long time.

The set is great for the money. These crimping pliers alone will cost you more than this entire set in normal operation. The 1900 tips are a great bonus if you ask me. The crimper looks good and is of good quality. I just received it so this is by no means a long term review. But I've been using it for a few days and it works exactly as it should. I am more than happy with the purchase. I think it's great quality and would recommend it to anyone who needs a crimping machine and ferrules.

I needed to add grommets to the ends of an electric car charging cable which was unplugged when the cable got stuck in my car's bumper. This crimper was perfect for the job. It's easy to use, has loads of tips (more than I've ever used in my life) and is of good quality. This is no ordinary Harbor Freight junk, this is a good quality instrument. Now I'm walking around the house looking for something else to compress! I realized I need to do this for some of my speaker cables in my A/V setup.

As an industrial service technician 95% of our connections are crimped so this is used quite often during installation. Modernization. I really like the hex crimp shape as most of our connectors are round which makes them easier to insert without having to adjust them to the screw. The tips are fine, I added an extra spacer to make room for the 24AWG tips. I lubricated all the hinges without much help. There are no additional spacers in the handpiece box. Used one from an old box to make room…

to redo the electrical connections on my 3D printer after reading that ferrules on the ends of the wires make much more reliable connections. Comes with an excellent selection of different size ferrules to accommodate different wire sizes. And there are plenty of those, that should be enough for a while. Using it couldn't be simpler, choose an appropriately sized ferrule and slip it over the end of the wire (twist first if the wire is stranded). Then place the metal part of the ferrule in the…

When a relative introduced me to this connector system, I saw no immediate benefit. However, once I bought one, I used it a lot. Provides really clean wire ends for all types of connectors, connectors and even for use with alligator clips. No more frayed wires shorting out adjacent connections. The tool is of very good quality and works perfectly. The kit contains many tips; probably a lifetime supply for me. It would be nice if they included a one size smaller tip, but you can twist thin wire…

Stumbled across Y**tube to compare crimping machines that cost 6 times the price (and are made in the same country). I had no problem crimping any size "one-handed" with this "cheaper" tool. The nozzles are also of good quality. It has a plastic storage compartment for individual sizes and a nice outer box for the whole set. A handy sizing guide to make it easy to choose the right tip for your wire gauge. I have hex pliers - a newer style than square pliers. As a DIYer, this kit will last a…

This is a very good product for the money. I'm a young industrial control engineer slowly gathering the tools of the trade for my job. I used my company/colleague's tools, but I decided to buy my own tools. These pliers are of very good quality. They're not as sleek as the $150+ sets, but to be honest I'd still buy them over Blades or other big brands. My colleague stopped by today and saw me using them. I let him try them and he was impressed with them too, especially when I said they cost…

This set is a great valve for anyone just starting out with electrical engineering or who doesn't need high performance valves like the $200 Knipex. Very easy to use. The inner label shows the metric to SAE conversion so you can size the cable to match the colored ferrule you need. I find the hex crimp wraps around the wire better and is easier to insert than the square crimp. This is useful for block terminals where wires are inserted into a hole. The ferrule prevents wires from fraying during

I've used many different methods for stranded wire ends over the years, but using this crimping tool with the correct ferrules (included) is the best method I've used. I'll admit that sometimes in the past I just twisted the wires and got the job done. When I wanted to make a really strong and durable connection I spent time soldering it, but soldering can be a slow process that is often inconvenient, especially when working overhead or in cars where you might be concerned about have to do hot…