Revain logoHome Page
리뷰
retear oculus quest accessories protective 로고

Retear Oculus Quest Accessories Protective

Excellent value for money. The Oculus carrying case carefully keeps all parts of the Oculus in place and offers good padding and a grip. We have traveled with it through France and the whole country.전체 리뷰보기

goldenel universal degree rotating finger 로고

GoldenEL Universal Degree Rotating Finger

Was great until it broke and now doesn't work as a stand. The phone is now harder to hold. If you want a product for a month then this is it. In the long run it's more money to go for a phone case ring yes but it's worth it. Lasts better, lasts longer, my last was a 10.00 through a casemate and lasted over 2 years. This one is cheap, cute but doesn't last long, well you get what you pay for.전체 리뷰보기

kenuco panels shelves active components 로고

KENUCO Panels Shelves Active Components

I bought a stand for my Ubiquiti gear and thought it was perfect. The build quality is solid material and there's plenty of room for cables. I assembled the device and started adding accessories that I bought separately. The TRENDnet TC-P12C6 fitted well, but there was a problem: the Middle Atlantic 10" Half-Width Rack Shelf didn't fit, and neither did the Atlas Sound Half-Width Rack Power Conditioner. My first thought was that I had invested a lot of money to complete the setup and none of the accessories fit the device due to few centimeters to cut about 2.5 cm of the front rails at each corner, attached to the front mounting plates. By removing the profiles I was able to mount the front panels on the outside of the mounting rails instead of the inside. The back of the rack doesn't have a problem with this since the gap is already there. I'm a little confused as to why an extra inch of rail is needed at the front corners of the unit as they don't seem to help support the structure. well built block first. The lack of an inch rail would allow the front panels to be mounted on either side in the same way you can mount it on the back of a rack. Apart from this small test I like the device. Added photos for 9U and 4U models and where I cropped to fit. By removing the profiles I was able to mount the front panels on the outside of the mounting rails instead of the inside. The back of the rack doesn't have a problem with this since the gap is already there. I'm a little confused as to why an extra inch of rail is needed at the front corners of the unit as they don't seem to help support the structure. well built block first. The lack of an inch rail would allow the front panels to be mounted on either side in the same way you can mount it on the back of a rack. Apart from this small test I like the device. Added photos for 9U and 4U models and where I cropped to fit. By removing the profiles I was able to mount the front panels on the outside of the mounting rails instead of the inside. The back of the rack doesn't have a problem with this because the gap already exists. I'm a little confused as to why an extra inch of rail is needed at the front corners of the unit as they don't seem to help support the structure. well built block first. The lack of an inch rail would allow the front panels to be mounted on either side in the same way you can mount it on the back of a rack. Apart from this small test I like the device. Added photos for 9U and 4U models and where I cropped to fit. I'm a little confused about why the extra inches of rails in the front corners of the unit are needed as they don't seem to help support the structure of a well built unit. The lack of an inch rail would allow the front panels to be installed on either side in the same way you can install on the back of the rack. Apart from this small test I like the device. Added photos for 9U and 4U models and where I cropped to fit. I'm a little confused as to why the extra inches of rails are needed in the front corners of the unit as they don't seem to help support the structure of a well built unit. The lack of an inch rail would allow the front panels to be mounted the same way on both sides, how to mount it on the back of a rack. Apart from this small test I like the device. Added photos for 9U and 4U models and where I cropped to fit. why the extra inches of rails in the front corners of the unit are needed as they don't seem to help maintain the structure of a well built unit in the first place. The lack of an inch rail would allow the front panels to be mounted on either side in the same way you can mount it on the back of a rack. Apart from this small test I like the device. Added photos for 9U and 4U models and where I cropped to fit. why the extra inches of rails are needed in the front corners of the unit, since they don't seem to help maintain the structure of a well-built device in the first place. The lack of an inch rail would allow the front panels to be mounted on either side in the same way you can mount it on the back of a rack. Apart from this small test I like the device. Added photos for 9U and 4U models and where I cropped to fit.전체 리뷰보기

camvate camera handle tripod panasonnic camera & photo 로고

CAMVATE Camera Handle Tripod Panasonnic Camera & Photo

This cage is an incredible value. Each component is built like a tank and incredibly strong once assembled. The entire cage has been packed with each piece in its own bubble bag to ensure nothing can be damaged in transit. There are no instructions for assembling the cage, but using the photo from the Revain article it's pretty easy to figure out what goes where, although I didn't connect a few things correctly at first. The top handle is incredibly strong and massive. Once the chamber is attached to the bottom plate and top plate with a sliding cold shoe clamp, the whole cage works like a solid rock. Nothing dangles or dangles. Like I said, it's incredible value for money as I'm sure you could almost double the price if you bought each piece individually. The shipping was also incredibly fast as it came from overseas. I'm used to waiting weeks for items I order from China, but they arrived in Southern California in less than a week.전체 리뷰보기

vbestlife gramophone phonograph players replacement 로고

Vbestlife Gramophone Phonograph Players Replacement

I received a different model and size than the one ordered Does not fit my car The return costs more than the product This is not the best way to do business전체 리뷰보기

samsung galaxy a102u unlocked phone 로고

Samsung Galaxy A102U Unlocked Phone

My phone had a fault I thought it was temporary so I inserted my SIM card and the screen went black. was lit but still empty so I couldn't turn it off or restart it. I had to wait a few minutes for it to turn on so I could switch my SIM card back to my old phone, then it went off before I could factory reset it, but I'll be sending it back anyway. I'll use the phone I have until I'm sure I've found a phone that doesn't have glitches like this.전체 리뷰보기

samsung mb mc64ha everything stromboli microsdxc 로고

Samsung MB MC64HA Everything Stromboli MicroSDXC

I bought a new Samsung Galaxy A71 5G and when I inserted my old SD card (only 2GB) the new phone kept throwing error messages. This new 64GB SD card immediately solved my internal storage problems.전체 리뷰보기

godox thinklite tt685n camera autoflash 로고

Godox Thinklite TT685N Camera Autoflash

Great value Flash

I have to say I really like this flash. It's not overly expensive, performs well for what it is, and charges fast enough with AA batteries, and the fact that I can add an external battery is the icing on the cake. The head tilts and rotates to reflect the flash. Pairing this with the X1-T transmitter gives you plenty of off-camera flash options, whether you're shooting in an umbrella/softbox or adding a spotlight/reflector. Remember this is just a flash. You won't get the performance of a studio flash. The only caveat is that at full power the flash has a "tail" on the pulse of light that may not stop the movement and have a streak on the photos. Flash sync to the back curtain helps. it was about half the price of my Nikon SB-500 and half the price of a flash. I can recommend it as a viable third-party option for those on a budget.전체 리뷰보기

gaomon ga3 tracing light cutting 로고

GAOMON GA3 Tracing Light Cutting

I use it for drawing, you can transfer your drawings if you mess something up and it worked even better at night when it was too bright you can move your Finger to adjust the brightness. I've spent a lot more time painting, I highly recommend it if you like traditional art, I've had no problems, I've even given up and it's just awesome!전체 리뷰보기

pc accessories connectors female plated 로고

PC Accessories Connectors Female Plated

Item arrived on time and worked perfectly. For crimp pins that are really affordable I would highly recommend these guys!전체 리뷰보기

Peris Auditore photo

Peris AuditoreA.

Novice Writer
1 수준
29 리뷰
0 카르마

전기

6월 13, 2022에 가입