🔧 Fittings

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Legines female coupler for connecting 1/4 inch NPT fittings through a bulkhead. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Gasket and nut for air tight seal through bulkhead. 1,200 psi maximum working pressure. Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Relief pressure preset to 175 psi with flow rate of 157 cfm. 1/4 NPT threaded inlet connection with Vibra-Seal thread lock. Brass construction and music wire spring for corrosion resistance. 250 F maximum temperature for use in high temperature applications. ASME safety rated with UV and NB marks.

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Coupling for connecting a hose to a female connector. Connects a hose on one end and a female GHT threaded connector on the other. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Barbed fitting for a tight seal on hoses. These fittings contain lead and are not allowed by federal law to be installed for…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Pack of 2 clamps. Variety of applications, easy to install. Stainless steel and rust resistant. Worm drive adjustable with screwdriver for a super secure fit.

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

DURABLE MATERIAL: This float valve is made from high quality engineering plastic ABS and PE (Polyethylene) for corrosion resistance;. GREAT DESIGN: Rubber washer ensures a tight, leak free kit; adjustable arm with over 180 degrees of adjustment range; PVC Screw for adjustable arm prevents rust and oxidation;. VERSATIL: Works great for water trough…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

brass & stainless steel. [Safety and Healthy]: Made of Lead Free Brass, our regulator meets NSF lead-free requirements of less than 0.25%.Our water pressure regulator can reduce original water pressure and make it stable to use. [Compatibility]: Compatible with U.S. 3/4" water sources(ND20) & NH threads, the regulator can compatible with all U.S. water…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

★Material:The winterizing adapter is made of high quality heavy duty brass metal material. Strong ruggedness and good durability. ★ Easy to use:Easily connects to air compressor and garden faucet to winterize lawn sprinkler systems, faucets, and plumbing to prevent damage due to freezing. Compatible with 3/4 inch standard garden hose threading and 1/4"…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

May be installed without disassembling the valveManual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored. Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system. Compact…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Can be used as a tank check valve for small compressors or as a component in pneumatic circuits. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Fluorocarbon O-rings for higher temperature and chemical resistance. Female and male NPT threads for connecting pipes with different ends. Maximum pressure rating…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

SPECIFICATION: Acceptable Fluid : Air And Water Pressure Range: Max Working Pressure: 2mpa | 290psi/ Working Temperature:-20°C—120°C | -4°F—248°F Applicable Tube: PU/NYLON/Soft PE Hose Push Connect Air Fittings Push Fitting. Installation : push to connect fittings can be done within a short period of time. This tube connector is available in various…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

★WATER&FOOD USE MATERIALS: Our Stem Elbow Connector is made from safe,non-toxic materials.They are widely used for RODI system,plumbing or drip irrigation System etc. ★SIZE&TUBE COMPATIBLE WITH:1/4" Quick Connect fitting X 1/4" Stem Plug;Fits standard 1/4 inch O.D. water tubing used on most Water purification systems ( check your tube size carefully…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Length: 22 3/4". O.D.: 1/8". 560742860. Compression fitting. Aluminum tubing.

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

45-degree elbow for connecting two pipes at an angle. Hub ends for connecting to male unthreaded pipes or fittings. PVC-DWV for corrosion resistance, high strength, and less weight than fittings made from metal. Smooth interior finish for reduced friction and material buildup. Meets specifications ASTM D2665 and D3311 for quality assurance

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Air Valve (non-vacuum). Float-type vent. Single non-adjustable port. 1/8" NPT angle connection. Maximum operating pressure 6 psig (0.4 bar).

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Reducing Coupling for connecting two different size male threaded pipes. 1/4" Female National Pipe Taper (NPT) threads on one end and 1/8" on another end. Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded. Operating pressure of our fittings is up to 1200psi…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

[High-quality material]: High-grade solid brass, strong and wear-resistant, more durable than iron and iron galvanized pipe fittings. [Durability]: The shower fittings has a first-class chrome-plated paint, which has excellent corrosion resistance. No matter what kind of shower you use, its surface effect will match it. [[Superior thread]: Exquisite…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Adapter for connecting a hose to a male threaded connection of a different diameter. WAY OF PACKAGING: The product packaging method is bagged Please confirm before buying. Hose barb on one end and male NPT threads on the other, Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Barbed fitting for a tight seal…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Product OverviewThe Ideal Tridon Micro Gear Stainless 25 Pack is a top-of-the-line product in the category of fittings. Designed for industrial applications, this product boasts exceptional durability and performance. Made from a high-grade nickel alloy, it provides superior corrosion resistance, ensuring a long lifespan even in demanding…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Nipple for connecting and extending pipes. Male National Pipe Taper (NPT) threads for connecting female threaded pipes. Made from brass for higher corrosion resistance than steel. Made of Alloy 230 from seamless red brass pipe for greater ease in machining than yellow brass. Meets NSF/ANSI 61 for use in drinking water supplies of pH 6.5 and higher.

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

1/2 INCH X 12 INCH BLACK PIPE NIPPLE 6 PACK: Design ambitious projects for your bedroom, bathroom, kitchen, den, dining room without worrying about running out of pieces. Stock up so you have the connectors on hand when you need them. Multipack quantity gives great value and ensures you don’t run out in middle of a project. Create rustic shelves, hooks…