π Indexable Inserts
2 Review
Boring Bar Style L10; Shank 5/8"; Minimum Bore .710"; Length 7". Use Insert TP.-32.; Lead Angle +5; Screw M4x10. Torx Wrench T-15. Positive Rake; Use TPGB Inserts. Torx Wrench T-15
2 Review
It Is Processed By Imported Technology And Has The Advantages Of High Hardness, Strong Wear Resistance, High Smoothness, Not Easy To Stick To The Knife, And Smooth Chip Removal. Different R Angles Can Meet Your Needs For Fine Turning Or Rough Turning, Reduce Cutting Resistance, And Achieve Sharp Cutting. The Turning Is Light And Fast, And The Advancedβ¦
Read more about this product
2 Review
It Is Processed By Imported Technology And Has The Advantages Of High Hardness, Strong Wear Resistance, High Smoothness, Not Easy To Stick To The Knife, And Smooth Chip Removal. Different R Angles Can Meet Your Needs For Fine Turning Or Rough Turning, Reduce Cutting Resistance, And Achieve Sharp Cutting. The Turning Is Light And Fast, And The Advancedβ¦
Read more about this product
2 Review
It Is integrally Formed By Grinding, Which Has Higher Hardness, Strong Wear Resistance, Sharp Edge, Good Finish, And Is Not Easy To Cause Anti-Burr. It Can Process Steel, Stainless Steel, Hardened Steel And High Carbon Steel. A3 Steel, Die Steel And Other Steel Parts Below HRC40-51 Degrees Are More Suitable. Metric General Thread 0.5-3.1, Can Beβ¦
Read more about this product
2 Review
Riveter Kraftool 31176-H6, used to create one-piece connections using blind rivets. Used with aluminum rivets with a diameter of 2.4; 3.2; 4.0; 4.8 mm, steel and stainless rivets with a diameter of 2.4; 3.2; 4.0 mm. The KRAFTOOL riveter withstands high working loads and is designed for setting aluminium, steel and stainless steel rivets of variousβ¦
Read more about this product
2 Review
Indexable Carbide Milling Insert 1/8" Thick,11 degree relief angle. Material: made of solid carbide with mutilayer coated, offer long life and faster cutting speed, low friction coefficient, good wear resistance. For turning and milling carbon and alloy steels, tools steel and stainless steel. Screw on triangle style insert with a chipbreaker. 10 piecesβ¦
Read more about this product
2 Review
β₯Package includes :1PC SNR0013M16 boring bar + 11PCS 16IR AG60 carbide thrading turning insert + 1PC T15 wrench. β₯SNR0013M16 : overall length : 150mm=5.9inch , shank diameter : 13mm=0.51inch, cutting direction : internal thread right cutting. β₯ Thredaing boring bar : The material of the boring bar is 40Cr steel, Widely Use, Tightly impacted bolt, simpleβ¦
Read more about this product
2 Review
Size:Turning Inserts DCMT32.51(DCMT11T304) 5/32" Thick,1/64" Radius,Relief Angle 7 Degrees. Material: made of solid carbide with multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance. Designed for Steel, cast iron and non-ferrous materials. Used for turning and finishing on a wide range ofβ¦
Read more about this product
2 Review
For shallow precision grooving and profile/copy turning. O-ring. snap-ring, relief grooving and high production. Opening of wide grooves by plunging and side turning. Precision clamping and insert indexing accuracy. Stable under side cutting forces when profile turning. Extra 10 GTN Carbide Tin Coated Inserts.
2 Review
Size:Turning Inserts MGMN200 6mm x 3mm x 2mm. Material: made of solid carbide with multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance. Designed for Steel, cast iron and non-ferrous materials. Fit for MGEHR / MGIVR grooving cut-off tool. 10pcs With a plastic box for convenient storage.
2 Review
Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Multi Layer coating TiN/TiC/TiCN/TiN for turning and milling carbon and alloy steels, tools steel and stainless steel. Provides longer tool life than uncoated grades. Used for finishing andβ¦
Read more about this product
2 Review
Carbide. TiN Coated. DCMT32.5. for SDNCN10-3B and SDJCR10-3B tool holders.
2 Review
β₯PACKAGE INCLUDES : 7 pieces 10mm shank indexable carbide lathe turning tool holders( SDNCN1010H07, SDJCR1010H07, SCLCR1010H06, SER1010H11, MGEHR1010-1.5, S10K-SCLCR06, SNR0010K11), 14 pieces indexable carbide inserts(CCMT21.51, DCMT21.51, 11IR A60, MGMN150-G, 11ER A60), 7 pieces wrenches. β₯Each tool holder comes with a C6 TiN Coated indexable carbideβ¦
Read more about this product
2 Review
Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. General purpose grade designed for cast iron andβ¦
Read more about this product
2 Review
For use with Grizzly model T10293. Package dimensions: 1.57" x 3.7" x 0.39". Approximate weight: 0.05 lbs
2 Review
Sclcr Boring Bar 5/8" Shank Diameter, Overall Length 8β. Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance. Used for Turning internal hole, reaming, copying,etc.used for semi-finishing on the existing hole cutter,fit boring machine, lathe machineβ¦
Read more about this product
2 Review
β S16Q-MCLNR12 boring bar : material is alloy steel, shank Diameter 5/8'' , overall Length 7'' ,cutting direction:right hand. β CNMG431 turning insert : material is carbide, coating is TIN, can be used to process stainless steel, cast iron, steel parts. β The carbide inserts and turning boring bar are packed in plastic containers, safe and easy to storeβ¦
Read more about this product
2 Review
Model:1PCS MGIVR2016-2 + 1PCS MGIVL2016-2 + 2PCS MGMN200-G NC3020. Shank Diameter: (5/8" inch / 16*16mm) ; Overall Length:( 6.3" inch / 160mm). Grooving holder : Each tool holder is black oxidized smooth surface and tool hardness (HRC 48 degrees up and down) and precision are up to the first grade. Insert : Turning inserts exquisite workmanship, highβ¦
Read more about this product
2 Review
Grade for uncoating, gray color surface polishing process can reduce accumulation of debris, obtain higher surface quality. Size(IC): 6.35mm, Thickness(S): 2.38mm, Dimension(Ξ¦d): 2.8mm, Radius(R): 0.4mm, Angle: 7Β°. Suitable for Aluminum, magnesium, copper, brass, plastic, wood finishing to roughing processing. Peripheral machine grinding and surfaceβ¦
Read more about this product
2 Review
CVD Coating, black and yellow. Insert Grade: BPS101. Chip Breaker: MD. Material: Carbide. DNMG432. Coating: CVD Al2O3 TICN. Machining Parts Material: Steel. Machining Process: finish. BPS101 Black/Yellow. Coating Grade: CVD coated carbide grade, wear-resistance materials coated on the gradient sintered substrate which has both good hardness, toughness.