Review on Cooler Master MasterBox E500L MCB-E500L-KN5N-S00 by Som Chai ᠌

I will add a few more controversial points in the case, which are not minuses, these are rather features of the case: 1. Support valves up to 140mm. Rear wall only 120 mm. When installing an ATX mother, only 120 mm fans will fit at the bottom. Only 120 mm will fit on the front wall with an ATX power supply, with SFX you can put 140 mm. 2. An acrylic wall is a nice thing, especially if there is a backlight, but you have to pay for it with sound insulation. In a good way, the edges of the frame should be covered with soundproofing material. The PSU fan also adds noise, but this is specifically mine, even in the old closed case it was louder than the others, a replacement is coming soon, we'll see. 3. Supports the installation of monstrous video cards, but you have to think carefully about how to lay the power supply wires. 4. Good ventilation of the body, it blows and blows from all the cracks, but the dust will arrive faster. Standard filters on magnets are a convenient thing, but fine dust on this side (I haven’t seen normal filters in any case yet, apparently no one knows that foam rubber exists). 5. The package bundle is on the level, although instead of poor plastic mounts for fans, it would be better to put rubber or ordinary screws. If you have ATX components and want a case that will not take up much space and rationally use the internal space, then take it without thinking! You won't find smaller cases on our market!