AMD Phenom II X4 940 💻 Black Edition 3.0GHz AM2+ Processor - Retail Review

I came home in the evening after a hard day's work. I looked at my laptop with AMD A4 5000 and Core 2 Duo E 6750 under the table and felt sad somehow. I broke the piggy bank and made the configuration: 1. AMD Phenom 925 95 watts 1500 2. Asus M2a74am se 1500 3. DDR 2 800 4Gb + 4Gb 1300 4. GeForce GTS 450 1Gb Gddr5 1500 5. Powerman 350 watts with additional power for the video card - I got it for free. The result is 5800, and this mess works =) And I bought a mini tower at a discount for 350 in a

Insights from my testing.Has some pros: Very easy to accelerate! Low cost. Compatible with AM2, AM2+, AM3, AM3+! Some cons: With good acceleration, it requires VERY GOOD cooling!

percent 965 hair dryer revision c3. mother asus m5a78m-usb3. overclocking by a multiplier in bios 3812. bridge frequency of 2400. valve zalman9900. memory DDR3 2 * 4 1333 at 1600. vidic gigabyte 6870. in the case 2 valves of 1200 revolutions. summer temperature max 56 degrees. everything works just super duper.

a good choice for gamers and not only well, and a good price-performance ratio of the game and video encoding is its element + multithreading Different pros: the processor is just a beast, everything flies calmly, chases up to 4200 MHz, I have a version on the C3 stepping, constantly running at a frequency of 4013 MHz Has cons: I didn’t find it, but I don’t have any problems with its cooling, since the ZhSO is installed

I took it to replace my Atlon X3 425. I immediately put it on and drove it to Tets W7, showed 7.3 points against 7 on the athlone! With modern PSUs and motherboards, I do not consider the energy consumption of 125 watts to be a disadvantage. Pros below: Good performance for the price. Unlocked multiplier. You can overclock well. I have enough of it for all my needs. Got cons: Large heat dissipation, you need a good cooler for overclocking. Low critical temperature.

Battlefield 4 with gtx 650 on ultras without lags is completely calm Watch Dogs has no lag on medium, so far this is the only game where I had to lower the settings. All the rest without question.

Great processor and not expensive. Works for me recently. Thecomoler is small, but there is no overheating. Mother - ga-870a-usb3l. I don’t know how much longer to wait before the upgrade, there is no money due to the crisis.

A very cool processor pulls together with a geforce gtx640 battle3 with a bang. I advise for the first computer about overclocking, I don’t know, I haven’t tried it.

Very powerful processor for a ridiculous price, 3.4Ghz each core! Recommended for heavy duty games. (With NVIDIA CUDA GPU recommended for application system development and video decoding). Different pros: The fastest AMD processor from the X4 line. Works stably, keeps the recommended temperature adequately. Cons: There are really practically no drawbacks! Except that the peak temperature is not 70C but 65C

Personally, he worked for me first on the GIGABYTE GA-MA790FX-DS5 mother, then moved to the GIGABYTE GA-970A-D3 mother! Without any problem! In the first case, the maximum squeezed 3.2 GHz. In the second and sow day, it plows without interruption at 4.0 GHz !

Overclocked to the mat. Asus M4A89GTD pro board. Stable operation was maintained up to a frequency of 3812 MHz. It heats up moderately. According to the performance assessment in win7, it reached 7.6, the best solution in my opinion at an affordable price.

the temperature is a maximum of 50 degrees (well, it depends on which radiator) everything is super, I didn’t regret it and I won’t regret it !

Powerful and fast, in comparison with the X6 it is much faster in everyday fuss and games, but loses to it in heavy tasks, such as photo and video processing. Despite the large heat dissipation, I recommend it for a home system. And X6 is better for work. Threat I've been using X6 for half a year, I recently had a desire to return to X4, I want to be smart.

if you tinker with the bios, you can raise it to a stable 4200 mhz mother - asus m5a97r2.0 cooling - zalman cnps10x performa, the side cover of the system unit is open thermal grease - KPT8 idle pace - 40 under 100% load when encoding video - 55-59

Here are pictures of acomoler that provides goodcomoling and minimal noise. Ice Hammer IH-4401B . F/0_8496e_cac325_L. Jpg . Jpg . Jpg Different pros: Overclocking potential, performance, price. Will compete with some new models from AMD. Got cons: you need good cooling, a powerful PSU, you need to remove the original cooler mount from the motherboard to mount it, for example, Ice Hammer IH-4401B.

I bought a system unit in 2022 with this handsome guy, for 2 years the games were on high, but over time everything changed, I changed the video card to a GTX 650 (2gb), I have had it for 4 years (already 5 is on), many games are on high -ultra, except for Watch_Dogs and the new Assassin, otherwise it’s normal, I didn’t change the cooling system, everything is on the ASRock M3N78D motherboard with an AM3 socket (well, it’s easy of course), a wonderful processor, but unfortunately already old. I

overclocked to 3700 without raising the voltage with stable operation, the temperature in the critical test under peak load was 100%, did not exceed 61 degrees, the Zalman CNPS9700 LEDcomoler (. Xml? hid=818965&modelid=1001612&show -uid=782203112942179852) at 2200 rpm from 2800 maximum . Php? id=1575546 actualcomnfirmation

An good percentage for a potent gaming computer; in addition, make sure that the processor has regular cooling, such as an ice hammer ih 4400b (or 4300) noise 0 setting, and even though the percentage is not heated, it still has a lot of power. Some pros: Great percentage; in 7k, all four cores work in any program, and the temperature never becomes dangerously high. ZY a few days ago, I increased the bus speed by 227, and as a result, the bus speed is now 1840 MHz. The processor operates at a…

Since the price was at 300 uev, I decided to make the purchase. Now, in the computer used for gaming, it has already reached the price of 1,100, and this one has moved on to the second computer (I use 6 network screws as a file cleaner). Only after running the system at full capacity for an hour will the water cooling and 32 degree temperature be reached. In spite of the fact that the mosfet, chipset, vidic, and power supply all hang on the same system, this result was achieved. Temperatures of

With its pros. price (right now you can probably take and assemble a good system for 3tr, for example, I doubt if it makes sense to take Intel at their prices), performance With its cons. heats up at 60-65 degrees in acceleration to 3.8 and a voltage of 1.42v, maybe the thermal paste needs to be changed