🚗 Husky Liners - 56886 Mud Guards Set for 2014-19 Chevy Silverado 1500 & 2015-19 Silverado 2500/3500 - Custom Fit, Single Rear Wheels - Black Review

I installed them on my 2017 Silverado Duramax. They look great, fit perfectly, are well made and should last a long time! I don't understand the negative reviews about the holes not working or the tape in the wrong place? The holes aren't perfect, but they're close enough to get the screws in and they line up as you tighten the screws. I think some people are too picky and whiny! I would buy them again anytime!

As already mentioned, the protective film was punched incorrectly. Luckily, I had already seen the reviews and edited the film to make sure I didn't have the reported tearing issues. The rest of the installation didn't go much smoother, though: the holes didn't line up with the car, and no push-and-pull could fix the problem. I ended up having to redrill the holes in the valves to have a chance of aligning them. Luckily, the bolts on the car come with large washers. Should have been easier to…

They put front flaps on the rear wheels off the assembly line, but could you put the rear flaps on? It does not make sense. But for a few dollars I was able to fix this situation. Of course I was suspicious of drilling into my brand new truck. So here's what I did. I screwed in the screws, removed them, took a small brush and black Rust-Oleum and covered the inside of the holes. RTV screws coated and screwed back in. Then I painted the back of the holes and screws with more Rust-Oleum. Looks…

We bought these HUSKY fenders for our 2018 Chevy Silverado 2500 HD. Great product at a good price and fits perfectly. It took about forty-five minutes to install all four, I was in no hurry. All holes matched perfectly. I used a 1/4" ratchet and 1/4" socket with a T-15 Torx bit (star) for hard to reach places and a T-15 bit in a screwdriver handle where the number was. I didn't use the extra screw on the back (choose the included metal clip and make sure it's actually the best one after seeing…

Just installed no problem. Bores are to specification. Just one problem - the rear ones use double sided tape and there is a clip for the top part. They supply another screw for the "optional" hole to be drilled. Since my truck has less than 1000 miles I won't drill a hole just yet. However, if the brackets don't hold, I'll have to do it. The bullbars are attached really well and securely without drilling. The included protective tape doesn't quite fit. I assume this is a common pattern. No…

After spending several hours cleaning my white Silverado of tar and rail dust, I decided fenders were a must. I chose them after researching on the internet. It only takes a few minutes to fit to any wheel arch and the fit is great! Don't be a wimp and drill a 1/8" hole for the third bolt on the rear wheels. The extra bolt makes a HUGE difference. There are no wheels/tires to remove. Just use a socket wrench with a torx bit ". If you do this, the OEM tires will have enough clearance... and the…

Installed Date: 2016 Silverado 1500 Double Cab Fenders look like you can get them for a fraction of the cost from the factory. I evaluated the kit at a Chevy dealer and it was $115 for a pair of front and rear molded skid plates ($230 total WITHOUT installation). I was able to get this set of husky guards for about a quarter the price, and installation was easy. I will say the holes didn't line up perfectly as I had complained in the previous review. They were a hair's breadth lower when donned

They install with factory holes and screws and do not require drilling. Tips from my experience: You need a torx bit for the factory screws. There is little space on the rear wheels. The paint protection film is made of 3M Clear Bra material. There are tips and tricks to make fitting a sheer bra easy and successful, so watch some YouTube videos if you'd like. As others have pointed out, the cut parts of a sheer bra don't cut well, so use caution when separating. Aligning the bolts means…

I bought these fenders for a 2016 Chevy Silverado based on ease of installation and some good reviews. My experience was pretty bad. The punched protective film that runs between the truck and the paint protection fender was not cut cleanly from the surrounding material and tore when trying to detach it from the substrate. I contacted Husky for a replacement foil. The representative was less helpful and offered to ship the entire package back to the seller. When I asked why they couldn't just…