🔧 Improved Rok Hardware Fasteners Screws: Introducing ROKSTBFAST for Optimal Functionality Review

As others have said these clips are not exactly 90 degrees. I was concerned when a reviewer stated that they had to cut the slot at an angle for them to work. I tested them with a straight cut and found no problems. I tested several cuts at varying distances from 3/8" to 5/8" from the top of the table. I've found that 1/2 inch works best. I cut the slots 3/8" deep. Others have indicated that they came with either no screws or pan head screws. Mine came with Phillips screws. Would order again.

Table top mounts from Rok Hardware are the best way to mount a table top. Simply make a cut on the inside of the table skirt between 3/8" and 1/2" from the top and about 3/8" deep. Place fasteners about every 12 inches around the top, or at least one on each side. Fasteners take into account the seasonal movement of wood. Rok fasteners are unpainted but have a light oil coating likely from the manufacturing process and will rust if used on outdoor furniture. I use fasteners as is, but a coat of

First of all. For those who said it wasn't true or honest, they must be! This slight offset in them creates clamping pressure to hold the two pieces together like an apron on a countertop. For the same reason, there is a stamped reinforcement in the bow, which prevents the angle from changing. In terms of quality and use, they are perfect. Very strong and the same for all clamps and excellent value for money with screws included. I recently built a kitchen table out of walnut wood and used them