Skywalker SKY32812 Double Mount SKY 32812 Review

Purchased to mount an antenna mast on the side of the cab. I used a galvanized guardrail top and that holds it in place with no problems. Would buy again.

Well designed mast braces for my weather station. They came with the necessary equipment. I used masonry screws instead of the wood screws that came with it.

I had to adjust the angles and the parts were not identical but worth the money. Good enough. You may want to screw the rod into the two pieces when installing, just to make sure they line up properly.

Added 4 feet to the HDTV Antenna Stand without fear. Just make sure you screw them into something solid. I supported the sheathing of the house with another layer of plywood on the back for extra support.

Bought another brand a few years ago, paid more and they aren't as strong! They worked, but they're made of thicker metal. Love the fact that it comes with real screws. The clamp screws appear to be of good quality and the heads are unlikely to come loose (although I always drill a pin hole to prevent this). Nothing to say other than they are doing their job and they are very comfortable, my antenna mast is safe.

I used this pair to attach a 10 foot length of 1 3/4 inch OD steel pipe that will be used as the mast for my weather station to the gable of a storage room. They are very strong and easy to handle in this tube size (compared to what is listed in the product description). I wish they did them in 1" increments as a 5" spacing would be great. 2x4 underneath them to get the extra clearance I need to get over the roof overhang. They're probably a bit overpriced for what you get (you can find them…

Bought these to boost my outdoor TV antenna. I only needed one, and yes, it works "perfectly". Installed it the day before where I had a metal strap across the pole. Works great, TV antenna didn't get blown off in the storm we get. The only downdraft (my own fault was that I "supported" the underside of the pole that the antenna is mounted on (of course "now"). It worked "greatly" until a storm hit. The antenna was blown straight up to the sky Everything was fine, nothing 'broke' (the bracket…

. after fixing some very simple design and/or manufacturing errors. First off, not only are the holes in the wall mounts and the holes in the clamp mounts different sizes, they also don't match up when trying to clamp the correct size mask into the mount. So smaller bolts and nuts are provided for "fastening" - for your convenience, of course. The included "lag bolts" for attaching the wall mounts are undersized in my opinion, so I upgraded them to the next larger size to match the strength of…

I used this pair to attach a 10 foot length of 1-3/4 inch OD steel pipe that will be used as the mast for my weather station to the gable of a storage room. very durable and easily handles this duct size (compared to what the product description says). I wish they did them in 1" increments as a 5" spacing would be great. As it is, I laid 3/4 inch thick strips ripped from the 2x4 underneath to get the extra clearance I needed to get past the roof overhang. They're probably a bit overpriced for…

Bought these to boost my outdoor TV antenna. I only needed one, and yes, it works "perfectly". Installed it the day before where I had a metal strap across the pole. Works great, TV antenna didn't get blown off in the storm we get. The only downdraft (my own fault was that I "supported" the bottom of the mast where the antenna is mounted (it goes without saying that "now" is the case). It worked" perfect" until a storm hit the antenna just blown up into the sky Everything was fine, nothing…

. after fixing some very simple design and/or manufacturing errors. First of all, not only are the holes in the wall mounts and the holes in the clamp mounts different sizes, they also don't match up when trying to fit a correctly sized mask into the mount. So smaller bolts and nuts are provided for "fastening" - for your convenience, of course. The included "lag bolts" for attaching the wall mounts are undersized in my opinion, so I upgraded them to the next larger size to match the strength…