Header banner
Revain logoHome Page
🔧 yufutol 20pcs solid carbide burr set 0.118‘’(3mm)shank tungsten carbide rotary files burrs with 3mm cutting head diameter for woodworking, engraving, drilling, carving - compatible with most rotary drill die grinders logo

🔧 YUFUTOL 20pcs Solid Carbide Burr Set 0.118‘’(3mm)Shank Tungsten Carbide Rotary Files Burrs with 3mm Cutting Head Diameter for Woodworking, Engraving, Drilling, Carving - Compatible with Most Rotary Drill Die Grinders Review

9

·

Very good

Revainrating 4.5 out of 5  
Rating 
4.7
🔩 Power Tool Parts & Accessories, 🔧 Power & Hand Tools

View on AmazonView on ЯM

Media

(4)
img 1 attached to 🔧 YUFUTOL 20pcs Solid Carbide Burr Set 0.118‘’(3mm)Shank Tungsten Carbide Rotary Files Burrs with 3mm Cutting Head Diameter for Woodworking, Engraving, Drilling, Carving - Compatible with Most Rotary Drill Die Grinders
img 2 attached to 🔧 YUFUTOL 20pcs Solid Carbide Burr Set 0.118‘’(3mm)Shank Tungsten Carbide Rotary Files Burrs with 3mm Cutting Head Diameter for Woodworking, Engraving, Drilling, Carving - Compatible with Most Rotary Drill Die Grinders
img 3 attached to 🔧 YUFUTOL 20pcs Solid Carbide Burr Set 0.118‘’(3mm)Shank Tungsten Carbide Rotary Files Burrs with 3mm Cutting Head Diameter for Woodworking, Engraving, Drilling, Carving - Compatible with Most Rotary Drill Die Grinders
img 4 attached to 🔧 YUFUTOL 20pcs Solid Carbide Burr Set 0.118‘’(3mm)Shank Tungsten Carbide Rotary Files Burrs with 3mm Cutting Head Diameter for Woodworking, Engraving, Drilling, Carving - Compatible with Most Rotary Drill Die Grinders

Description of 🔧 YUFUTOL 20pcs Solid Carbide Burr Set 0.118‘’(3mm)Shank Tungsten Carbide Rotary Files Burrs with 3mm Cutting Head Diameter for Woodworking, Engraving, Drilling, Carving - Compatible with Most Rotary Drill Die Grinders

【Quantity】20 pcs Solid Carbide Rotary Burr Set, 0.118 inch shank(3mm) ,approximate 1/8 inch, fits dremel and most small rotary tools. 【Durable】Whole Piece made of heat-treated solid tungsten carbide that lasts long working life, sharp and sturdy. 【Target】Suitable for all skill level | this is a essential kit for woodworkers & enthusiasts who cleans up welds or works with metal frequently, easy to grasp and use, safe and reliable. 【Versatile】Widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding, cylinder head porting and sculpting. 【Convenient】Generally can be used with handheld electric or pneumatic tool drive (can also be used in machine tool).

Reviews

Global ratings 9
  • 5
    6
  • 4
    3
  • 3
    0
  • 2
    0
  • 1
    0

Type of review

Revainrating 4 out of 5

Very nice so far.: Cutting tools

I've played with two of these and the cutting design is quite interesting. It easily cuts a 1/4 inch corner of steel plate. I tried it out on 2x4 and cut out some of the letters very easily. I even shave 2x4's with great ease. They don't load. At this point it's too early to tell if they will survive. But the price is right.

Pros
  • super price
Cons
  • old

Revainrating 5 out of 5

Great set of different bits

I use them for engraving and having different bit shapes really helps when cutting different shapes on different materials. I mainly work with wood and sometimes bone (antler) so I think these bits will last quite a while before needing replacement. I've been using them for a long time and they're still nice and sharp!

Pros
  • good stuff
Cons
  • badly thought out

Revainrating 5 out of 5

Quality wood carving tools

I have a disability and make scrolls and distressed flags in addition to my small SSI payouts. I use these ridges to add detail and clean up. So far I'm very impressed. The kit comes with a good selection of burrs and has proven to be more effective than many of the more expensive burrs I've bought in the past. I will not hesitate to buy them again, as well as other products offered by the company.

Pros
  • High marks for support and durability from testers
Cons
  • Negative impression

Revainrating 5 out of 5

Large set of burrs for cutting burrs

I've been looking for a long time what burrs to buy for my new rotary tool as I've seen some pretty bad reviews about many of them popping up when I looked. I was initially skeptical of these kits because the shanks are technically less than 1/8" which is what I needed and I saw another review saying they didn't fit. They don't, they fit my 1/8 size. Tool, just needs a little tightening. Above all, the oak cuts through like butter. I am very happy with them and will use more YUFUTOL drills in…

Pros
  • Great for a small home
Cons
  • Expensive

Revainrating 4 out of 5

A good variety for a wide range of uses.

Bought these for a touch up where my Dremel sanding drums were too wide to fit. The variety of tips is great and helped smooth out the corners to smooth out some cuts. Then a light sanding and the edges were excellent. The only reason I'm giving these 4 stars over 5 is because they are all the same "grainy" and if you're not careful they will grab and tear at any soft wood like the birch plywood I used here. Haven't tried them on thicker hardwoods or other materials yet, but I suspect they will

Pros
  • Certified
Cons
  • Nothing Here

Revainrating 5 out of 5

Reliable and efficient

Used on broken bolts. I broke 1/4? screw on small motor (throttle lever). I then broke the bolt extractor into the broken bolt. I used them to carve the bolt and bolt extractor. When I finished the beat was a little lackluster (but still worked), but it was better than I expected. I also broke a 3/8 head bolt: on the same motor (8hp flat head). I used a drill to carve a 1/8" (burr size) center stop about 1/2" deep down the center of the bolt as a guide to drill out the rest of the bolt. This…

Pros
  • Easy to set up
Cons
  • Hard to tell

Revainrating 5 out of 5

I was surprised by the quality.

I wanted to review it because there weren't many reviews when I bought it. They are much nicer than I expected. I needed them quickly to get the job done and decided to buy better ones later. I've used them on brass, carbon steel, leather and various copper/silver alloys with no problem. They cut cleanly, the burrs themselves are well cut. I had no problems with chipping. I ran them at 15,000 RPM because that's the highest speed my flexshaft runs at, but I wish I had something closer to…

Pros
  • cool product
Cons
  • functionality

Revainrating 4 out of 5

Postpone review until I try it first

Delivery was very fast considering Hawaii. Haven't tried it yet so I've only given it 4 stars but once I've tried it on a small detail I'll update it. I'm happy about 5 stars because it looks pretty good. Last week I tried some very rough burrs from another supplier and only tried them today and was very disappointed because when I cut the rod surface it was high and low and I didn't get a smooth cut. I looked at it with a magnifying glass and a few teeth that were damaged, it was either broken

Pros
  • Pleasant to use
Cons
  • Almost everything is fine

Revainrating 5 out of 5

That is amazing! best at cutting burrs

When I saw them on Revain I thought they might provide me with the different shapes I was looking for. And although I would have liked a little more variety, I can't complain. Because those little burrs look and feel like real high quality end mills, cutter heads and cutting tools that we used on our CNC machines in the machine shop where I worked for many years. I use this type of burr for hand carving. Lexan (plastic) in durable and detailed two-piece molds. But they are far superior to the…

Pros
  • Dope 🔥
Cons
  • Safety