Review on TARAZON Polished Controls Intruder Boulevard by Casey Tatum

Incredibly well made for the price. Would buy again! As many of you have trouble installing this. Here we go. 1-Remove both distributor tubes.2-Remove and lower the pedal crossbar.3-Remove the brake pedal assembly.4-Remove the right footrest.5-Install the brake pedal adapter.6-Remove the shifter. Remove 7 shifter cable. (leave the rear ball joint on the shifter arm) 8-Remove the left side stand.9-Replace the cross member, do not reinstall the two front center bolts.10-Unscrew the front engine mount bolt.Spacers and a new longer engine mount bolt. (Do not fully tighten the engine mounting screw) 12- Reinstall the header pipes. 13- Assemble the lower crossmember to the front intermediate bracket of the center footpeg bracket. (Bottom mounting screws go into holes where no screws were previously reinstalled, do not fully tighten.) 14-Turn all brackets on/off and tighten all fasteners. 15-Install the new footpegs and controls. 16-Fit the new wishbones.