Review on Anti Slip Platform Mattress Foundation LIJQCI by Jasmine Grant

It is well packed in a very compact and tight package. The outer box is made entirely of corrugated cardboard (no cardboard) and while it perfectly stands up to the weight and any weather conditions it might encounter along the way, I'm not sure if it's recyclable (I'll throw it away with that). anyway with their secondary raw materials). .) All parts are easy to unfold and unpack. It comes with a thin double-ended spanner (10mm on one side and 13mm on the other) and an Allen key. While installation is doable with these two tools, there is no way to install this in 20 minutes with them. Save time while your hands and joints wear out.; Obtain a socket wrench with 10mm socket and 13mm socket and a ratchet screwdriver or a second socket wrench with a 5/32" hex bit or "H4.0" bit (metric 4mm -Hex bit). If you don't have them there are always tools, but it takes longer. This involves joining the corners to the outer frame and then to the center cross. I suggest doing it the other way around. Tighten all 4 center screws ./connections with nuts first then go and make one corner at a time.The pictures of how the corner pieces fit together could be a little clearer, I found the first picture a bit confusing.I prefer to start with the 2nd picture and one larger image showing in 3D perspective how all 4 bolts and 2 nuts connect the corner piece to both frame parts (note: the smallest bolts go through the 2 outer holes in the corner piece and screw into a recessed thread in the frame (no nut) , the widest and longest bolts go through the two inner holes on the corner piece, then through the head/leg frame and are secured with 13mm nuts. Other thinner bolts and 10mm nuts hold all middle connections.) I show many pictures of my setup; Starting with my California King foam mattress right on the floor, to opening a corrugated plastic box, unpacking the contents and a labeling error on my set (2 corners with "D" written instead of "C" and "D" but it's not hard to tell) , shows all the pieces unfolded and unfolded, shows the frame assembled, and finally my mattress is off the floor! Including time to unpack, time to grab better/easier tools, time to take photos along the way, and time to move the mattress back and forth, I spent just over 45 minutes at a comfortable pace without assistance . Overall this is definitely a solid and stable frame with just enough height to conveniently stow things underneath and get in and out easily.