Review on Bosch BC374 QuietCast Premium Ceramic Disc Brake Pad Set For Acura: 1990-1991 Integra by Monty Barganier

Installed these rear pads on a 2012 Nissan Murano SL 2 weeks ago. Excellent braking performance and zero noise with the new Bosch Quietcast ceramic rotors. I bought new Bosch Quietcast rotors and Quietcast ceramic pads to replace 5 year old Nissan OEM originals that were worn down to 4/32" material and only had 33,000 miles on them. and 19mm or 3/4" for the caliper bracket) handy for rear brake pads on Muranos. This makes the job much easier. Special notes on installing the pads: When installing the pads in northern or salty climates, be careful not to use wire brushes on guide pins, Use bolts and caliper brackets. Prevent all bolt threads from seizing (except wheel hub threads) and lubricate the caliper slide pins before reinstallation. After cleaning with a wire brush, always use Synthetic Brake Lube in the clamping area of the caliper bracket. Wear Always apply the included grease to the back of new pads before installing them in the caliper bracket.After threading the caliper back onto its bracket, reinstall the wheels and torque them to 80-85 ft-lbs with a torque wrench Nissan's specification for the Murano is 73-93 ft-lbs, i.e. h But I chose the number in the middle for security reasons. Recheck the torque of all removed wheels after 50 miles. Following the steps above should eliminate the possibility of brake squeal and ensure smooth operation. Not to mention. save a lot of money. 🙂