Review on Bissell Liftoff Cleaner Hose Attachment - 27F6 35K3 73H5 94Y2 by Shannon Hernandez

This replacement tube fits perfectly. I had to remove and discard the tee and just connect the hose to the existing white barb fitting. I suggest cutting and removing the old hose on the original fitting with a blade/knife. Also, using a curved screwdriver, I managed to loosen two screws from the base. We hope that the spare part will last another 3-4 years. It looks like the manufacturer was aware of the issue and increased the length slightly. In the attached picture you can see that the hose is not under tension when it is wound onto the machine's reel. April 12, 2020 - UPDATE: The replacement tube is still working perfectly. It does not deform when laid, so it does not break. It should be remembered that at the end of the work the reservoir is washed with fresh clean cold water and pumped through the syringe. The suction hose is also exposed to clean water to flush the system. The hose is coiled, there is no tension. Perhaps the replacement was made an inch or two longer to avoid the problems noted in previous complaints.