Review on 🔩 PSI Woodworking CF4J Lathe Faceplate: 4" Without Screwchuck for 1" x 8 tpi Spindle by Gene Taylor

Although I tightened the grub screw on the hanger bolt, the 2nd or 3rd part unscrewed the center of the hanger bolt and rounded off all the threads below the grub screw (at this point you either need a couple of lock nuts or a couple of vises to remove it from the part). Might have taken a little longer if I had noticed a flat spot on the threads and straightened them out with a set screw, but probably not by much. They appear to be M6x50 if you need to order a replacement like I did. It's also missing a set screw on the spindle. So if it's being used as a bezel I wouldn't recommend using it upside down. Otherwise it is a solid face plate/screw chuck. and I'm glad I bought it.