Review on LeeKooLuu F05: Ultimate Hidden Bracket Backup Camera with 📷 IP69K Waterproofing, Super Night Vision, and Wide 149˚ Viewing Angle by Jerry Forehand

Easy to install, comes with T-shaped cable connectors that reduce installation time. The video quality is the best I've seen from a camera like this. I really like the compact size. The part that you will have to spend the most time on is mounting the camera to the plate or whatever you are mounting. Here's what I did: 1. Clean all surfaces with warm soapy water and rinse.2. Wipe dry with a lint-free cloth or air dry.3. (Optional) - wipe with some rubbing alcohol - tip - use the small pads that come with phone glass proctor kits or check your first aid kit) 4. On the license plate, place the camera mount there, where she belongs. Scratch or use a marker to mark where to go. Take your time and do it right.5. Place the thinnest 3M spacer on the camera as shown in the instructions and video6. Place the bezel on the license plate, remove the cover from the top and set aside. Do not touch the clean cushion or let the wind blow dust or anything else on it.7. level it. Take your time. and press firmly against each other.8. If you're confused, additional pads are available and just start with clean surfaces. You don't want to do this, so take your time and get it right the first time.9. Save the extra spacers in case you need them again, or put them on the new plate. There are many videos about their connection. Not just the ones the company publishes in the user manual. It just takes some basic tools, some patients and a willingness to DIY! Took me about 20 minutes total. But I've done it before, and my toolbox is already in the trunk.