Review on R22000 Multichoice Universal Integrated Diverter by Joe Garczynski

Installed with no problems. Solid brass and clearly marked top and hot/cold sides. When hiring an installer, be sure to inform him/her about the combination valve body. My plumber was confused by the device and its application until I explained it. In addition, the standard installation. The block uses 1/2" connections. A 3 or 6 function diverter can be used. Comes with a connector cover on the right side if you are using a 3 function diverter. You can only operate 2 outputs at a time. You can connect three elements but only two can work at the same time.One thing to note is the flow difference between this valve body and the equivalent with stops.This valve body has a higher flow rate.This may or may not be important for you depending on your application neither does the difference is between 0.2 GPM and 0.9 GPM look at Delta's white paper there is a table that separates by pressure and cartridge selection it's just the brass valve body that goes with the You will need to purchase a separate "trim" kit that includes the cartridge and the parts you "see".