Review on 🎧 Aux Interface for Honda 2.3 Accord, Civic, CRV, Acura CL, EL, MDX 1998-2005 | Yomikoo Radio Adapter Audio CD Changer 3.5mm Aux Interface by Scott Tompkins

UPDATE. Open it when buying. There are 2 screws on the case. You need to peel off the white label. I jumped over two wires: a thick black ground wire and a blue wire. No pics: I started by grounding the blue wire first after plugging it into the back of the unit. I screwed a similar cable into the housing of the radio itself. This reduced the noise by 50%. Adding a cable in the AUX box further reduced the noise by 45%. I haven't done a lot of testing and troubleshooting as everything I've done up to this point has been with the engine running. I just decided I would do both and forget about it. Maybe you can jump like the picture and you're done. Please test before conversion with the engine running. YOMIKOO: Please implement this solution in your equipment. Simple solution! And your ratings will improve. Yes, this requires a built in ground loop isolator. The Aux cable produces a constant and consistent buzz and whistle as the engine revs up. Actually quite a shame. This product costs $22, you can buy a new Bluetooth deck for about $25. If sound is important to you, spend your money elsewhere. Some people have managed to add a 30 pin bluetooth adapter to one of these https://amzn.com/B01ALDYGEG.