Review on 🌬️ Revolutionary Volant 19754 Air Intake Kit for Enhanced Cooling by Deron Gilliam

First, the installation videos that you can find on the internet are missing many things that you will encounter when installing this unit and many issues are not addressed in the instructions. There is also no quality control. First prepare something to cut the foam and rubber pads, because the one that seals the box in the wheel arch is NOT cut to size when delivered. Also, the holes in the same joint will NEVER line up the way you want them to. Also what they don't mention is that you may need to remove the metal bracket that was used in the factory CAI. If you suffer from OCD this setup will drive you crazy because nothing is perfectly aligned and never will be perfectly aligned. Every single joint is stressed and somehow only really held together by the rubber flanges they send. The MAF sensor hole and two bolt holes on the intake manifold on mine were drilled incorrectly in the wrong position. One of my screws had to go in a little sideways as the holes didn't line up perfectly with the sensor. It was like that, or send it back and wait a week for another. This is the first thing to check upon receipt. Now that it's available. Well he looks cool. Maybe 1mpg CAN be an improvement in fuel economy and enough power and throttle increase to keep trying to gauge if it makes a difference. There is an improvement, but not a crazy improvement. There's a difference in sound, but it's not a grating sound, more of a resonating sound when you step on the gas. However, be aware that this product is NOT very easy to install and if you suffer from OCD this will worry you as you will never receive this product and line it up as perfectly as you would expect.