🔍 GOLDENROD (595-3/4): High-Performance Canister Fuel Tank Filter with 3/4" NPT Top Cap Review

Great for inlet fuel filter if fitted. Converted my F53 motorhome to an external pump system. Used it as a pre-filter so I didn't need anything other than a suction tube in the tank. It would be nice if they made one with mounting tabs, but I realize I'm not using it properly. The good thing is that it only has one I/O port, which avoids running out of extra connectors. Better than other filter heads that I paid three times more for.

I use this on my race car and so far it's fantastic although not recommended for e86, I've been doing it for a month now. If I ever run into a problem I will update this post. I used two fittings from 3/4npt to 8an but I had to use teflon tape to stop the tiny leak. Fuel pressure checked to 100psi with no problems. Filters measure 4 inches x 5 inches. You can also find larger capacity 4 x 9 inch filters if you have space. And Cim-tek sells 5 micron e85 filters if needed.

Damaged threads on both. Got one and liked it, but threaded the filter and it wouldn't screw on. Looking closer at the threads the filter turns on, it looks like the machine that made it cut and adjusted 1/3 of the way, then cut another 1/3, adjusted and another 1/3 cut and stopped leaving burrs and fine threads right where to correct it. Returned the first, took the second, same thing. Sent back and refunded. Switching from wix 24001 is a bit more expensive instead, but at least I know it…