🔧 Joywayus Tire Inflator Valve 1/4" Open Flow Air Chuck with Lock Connector and Stainless Steel Clamp 2 Pack: Improving Tire Inflation with Precision and Convenience Review

Easy to install replacement for a failed air cartridge on a portable compressor. Seems to work better than the original manufacturer's solution.

The tire inflation valve is easy to install. This is a quality product that should serve me for years. I replaced an inflation valve that failed after 20 years of use. I checked the inflation and the accuracy was correct.

The description said 1/4 inch. The 1 I received looks like it was made for a 1/8" vacuum line. back. Be sure to read the description carefully before purchasing. I searched a bit and found what I needed. I think.

This air liner snaps securely to the air choke on my Trek bike's rear shock and releases quickly enough that it doesn't lose pressure after I inflate it. The air pump I bought came with a cartridge that was too big and bulky for the job and it solved both problems at once. I used this to modify the extension hose instead of cutting the two valve heads off the pump hose as this head would also bleed my presta valves.

Works like a charm. The old fitting on my Black and Decker has survived. You can put a valve on a car tire, but on bike tires the fitting is simply deflated before the tires reach full pressure. So I was looking for a new compressor and wasn't thrilled with the choice. I saw this fitting and was hoping it would fit given the 1/4" inner diameter. I cut off the old fitting and put this on, it fit perfectly and filled the Pronto tires. I saved $75 doing this

I have a 2HP compressor with a built in hose that is printed with a 1/4" ID. The 1/4" size was too small and the 5/16" size was also too small but I was able to pull a live sh1# out of the clamp and get a gasket. My experience with this type of fitting and hose is that the "notches" are slightly larger than the ID and the notches in between are the same as the ID.This is quality product and customer support is timely.Look for a size larger than 5/16" if your tube ID is 1/4" to ensure proper…

Had to replace a valve on my trusty and very old tire compressor. After looking around a bit, I settled on this one. They look high quality and are easy to install on a 1/4" compressor hose. The valve fits 'well' to the hose and the clamps are the right size. Generally the installation was quick with no problems. Only suggestion The one I have is to make sure you position the pinch screw down or away from the valve lever.The valve itself worked perfectly on my car's tire stem with no loss of…