🔩 Enhanced Performance SKF BR930502 Wheel Bearing and Hub Assembly Review

Very good quality part. I hope I don't have to buy them again but if I ever have to this will be the brand. I did a lot of research before I bought them. Much of this research indicated that this particular make was the same as that on the truck from the factory. I don't claim that personally, but the quality was very good and they fit and fit well in the truck, so I wouldn't be surprised if that's true.

Revain warned me that this part would not fit my 2500 Cummins. It stood where it was and turned out to be at least as good as the original part. The only difficulty was that the connector at the end of the ABS sensor cable on the side of the truck was not designed to mate with the connector on the truck harness (it was tight but not quite compatible). Luckily my old ABS sensor worked, so I just reused it (with some dielectric grease on the o-ring). No problem.

Completely identical to OEM parts. Perfect fit for my 2003 Ram CTD 4X4. Includes ABS sensor and wiring harness. To replace the hub you will need a 1 11/16 or 44mm socket to remove the axle nut. The caliper and caliper come loose. To remove the hub, loosen the 4 screws holding the hub and leave about 1/3 inch. Then use the head and the short extension on the same screw. Start the truck and turn the steering wheel so that the socket/extension makes contact. Axle housing or frame (depending on the