🍺 High-Quality Stainless Steel 304 Barbed Swivel Nut Set of 2 for Home Brew Keg Fitting - 1/4" BARB, 5/16" BARB - Ball Lock Pin Lock Review

Arrived exactly as described, different sized barbs for gas and liquid lines to secure the ball lock barrel. Used to upgrade my kegerator to accept balllock kegs.

Thread pitch slightly different. The nuts started, but quickly became stiff and could damage the stainless steel threads. The nuts looked right compared to similar nuts that worked perfectly. Return to Revain.

Revain marked the cold plate at the bottom of the page I ordered These parts were often purchased with the cold plate. The problem is they don't fit on the 1/4" compression side of the cold plate. Wrong threads.

My kegerator came with 3/16" ID hose to the spigot. The smaller barb and yoke fit fine. I dipped that Put the end of the hose in a cup of freshly boiled water so that the hose was soft enough to slide over easily.And I found a small screwdriver to insert into the mouth of the fitting to hold the fitting firmly when squeezing. Looks great I'm assuming the smaller fitting would also fit a 1/4" ID hose given how narrow it is.