๐ฉ Power Transmission Products
2 Review
โ Specification: Stroke length = 450mm(18"); Retracted length = 600mm(24"); Extended Length= 1050mm(42โ); Travel speed = 0.39 inches/sec (10 mm/s);Maximum current draw = 3Amps; Maximum Load = 225lbs(900N). โ Material: High quality aluminum alloy material, sturdy enough and with fashion look, High performance motor ,Built-in high quality limit switch. โ โฆ
Read more about this product
2 Review
V623 (I.D.=3mm, O.D.=10mm, Thickness=3mm). V623 bearings are shielded on both sides to keep lubricant in. Carbon Steel long-life bearings, smooth and low noise. ABEC Tolerance 1 (P0), Z2 Noise Level for most general use. Dynamic load rating of 536 newtons and Static load rating of 175 newtons.
2 Review
Working Voltage DC 9-12V. The maximum linear speed is 25mm per second. Moving 0.25mm for one step, can use microstep driver if need smaller. Widely used for small devices such as medical equipment, laser engraving machine, etc. The motor need a A4988 driver(not included) to drive, can not directly connect to power.
2 Review
ใMaterialใAluminiumใColorใRed, Gold, SmokeใHeightใ4.02"/ 102mmใWeightใ0.60oz/17gใCustomer serviceใIf you have any problem, please don't hesitate to contact us; GOMEXUS will provide one-year product warranty service. ใCompatibilityใTrapezoidal design, the bearing holder becomes larger, making it easier to handle and increasing the number of bearings thatโฆ
Read more about this product
2 Review
Natural rubber (NR), vulcanized, 55 durometer (shore hardness +/-5ยฐ) Mount body. Stainless steel Cover plate. Country of Origin : United States. Part number: 451.1-32-19-5/16-55.
2 Review
Max. Rod Dia.: 3/8", Spring Color: Black. Isolator Type: Spring, Lower Rod Penetration: 3-1/2", Capacity Range: 55 to 76 lb. Vibration Isolator Size: 4-1/4"(Height)*2-7/8"(Width), Deflection Range: 0.75" to 1.02". The spring hanger vibration isolator helps reduce vibration transmissions 2 to 6 times better than neoprene, as performance improves withโฆ
Read more about this product
2 Review
Compatibility: theses heated bed springs are compatible with most 3D printer heating beds, Ender 3, Ender 3 pro hot bed springs, flat top and hard springs. Compression springs size: aperture (OD): 0.31 inch/ 8 mm: Rod diameter (ID): 0.16 inch/ 4 mm; Length: 0.78 inch/ 20 mm, proper size to use. Yellow spring: according to the different types of loadโฆ
Read more about this product
2 Review
[Parameter] Workbench size: 1.3 inches square, X axis travel: 13mm, load bearing: 2kg. [Precision] The guide rail is a light-loaded linear ball-milled steel bar, and the displacement adjustment is driven by a miniature magnetic head with an accuracy of 5ฮผ. At the same time, the spring return can eliminate the axial gap. [Convenient] The top and bottomโฆ
Read more about this product
2 Review
For use in a variety of applications; appliances, automotive, marine, toys, tools, mechanical devices, contraptions and more. Compression springs are designed with flat end coils and feature strong spring rates. Spring dimensions: 1/4 in. outside diameter, 1-3/8 in. length, 0.025 in. wire diameter, 2.29 lbs. maximum safe load, 0.25 in. maximum deflectionโฆ
Read more about this product
2 Review
High quality material. Made of high strength chrome plated steel, wire diameter 3mm. Durability and no deformation, easy to use. Stretch line quickly and easily adjusted to ensure you have the right length and pull. Perfect cost performance. Versatile, can be used as a pet traction chain or tent wind rope buckle. For tent protection. When the wind blowsโฆ
Read more about this product
2 Review
Fit type: Vehicle Specific. The Package Length of the Product is 7.874 centimeters. The Package Width of the Product is 9.144 centimeters. The Package Height of the Product is 63.246 centimeters.
2 Review
Dimensions: 10mm(ID.) x 22mm(OD.) x 6mm(T.). 6900 Si3N4 Ceramic Bearing. Type: Deep groove radial ball bearings. Quality: Premium ABEC-5 quality. Balls Material: Black Si3N4 Ceramic/Cage: Nylon Cage/Rings: Steel ABEC-5.
2 Review
Deep groove geometry for high speeds. Single row for supporting radial loads. Steel cage evenly spaces balls for reduced friction, vibration and noise. Rubber seal on the side of the bearing exposed to contaminants and open on the other for applying lubricant. CN (normal) radial internal clearance for applications that do not involve thermal expansionโฆ
Read more about this product
2 Review
[SIZE] - Bore Diameter=4mm, Outer Diameter=10mm, Thickness=4mm. [MATERIAL] - Made of Chrome Steel(AISI 52100), have great wear-resistant, high temperature resistance and high hardness; Brass cage. [CAPABILITY] - Dynamic Load Rating (Cr): 0.658kN; Static Load Rating (Cor): 0.58kN; Limiting Speed (Grease): 6000rpm, designed for low speed operation andโฆ
Read more about this product
2 Review
Heavy duty linear actuator with 8 inch travel. Specifications: 12 volt DC [electrical], 770 lb max [static load]; 385 lb max [dynamic load], [Speed]: 7mm/sec @ 50% Load - 8mm/sec @ no load, Current: 1 [Amp Draw] @ no load. Overall Length: 17" (Min) to 25"(Max); Length Between Mounting Holes: 15.5" (Min) to 23.5"(Max). Example Industrial or Commercialโฆ
Read more about this product
2 Review
[SIZE] - 17mm Diameter Grade G25 Precision Balls. [MATERIAL] - Made of Chrome Steel(AISI 52100), features with polishing smooth surface, great wear-resistant and high hardness. [FEATURES] - Wide range of applications(maintain industrial equipment or use for family DIY projects); Cost-effective(can repair existing products). [APPLICATIONS] - Maintainโฆ
Read more about this product
2 Review
Chrome vanadium alloy steel construction for strength and durability. Polished nickel chrome plated finish resists corrosion.
2 Review
ใSizeใ-17x35x10mm(Inner DiaxOuter DiaxThickness);Material:Gcr15;Model:6003-2RS;Accuracy class:P0. ใHigh Qualityใ-The bearings is made of bearing steel for durability and resistance to rust, corrosion and deformity under heavy loads. ใFeatureใ-Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotationalโฆ
Read more about this product
2 Review
Made of 45 steel with high wear-resistance, strong and durable. Tapered Bevel Gear Wheel, 1.5 Modulus, 20 teeth, 10mm hole diameter. Used widely in conveying, agricultural equipment, textile machinery, printing machinery, automotive applications, etc.