Review on CURT 13240 Trailer Receiver Hyundai by Jeremy Tang

This towbar was easy to install on the Hyundai Tucson Sport. The retail price was $350 so at only $128.99 this is a steal. Installation took less than an hour with just a flathead screwdriver, a 17mm socket and a torque wrench. Using a screwdriver with 3 push pins on each side, remove the covers under the wheel arches on both sides. This allows the top two screws on each side to be inserted and tightened. Remove the exhaust pipe rubber support from the back of the muffler and slide the coupling brace up and into place. Insert two screws with washers on top to hold them in place so you can insert the screw from the other side. Then, without tightening, insert all the screws and hand-tighten. Use a 17mm socket to tighten all bolts behind each bolt to 42 ft-lbs with a torque wrench. Reinstall the wheel arch covers using the push pins and you are done.