Review on 🔋 Lester Summit Series II Battery Charger 650W 36/48V with QD Lockout: 5/16-in Ring Terminals, 6 Ft. Power by John Hall

Installed this charger on board my '96 EZGO TXT DCS 36v car. Installation was easy except for the interlink feature. The best I can guess is that the charger is not providing enough voltage across its internal 10K ohm resistor to signal the 1206SX controller to turn on the motor. In other words, the cart doesn't move even after the charger is disconnected. I have a 10kΩ resistor that needs to be installed between the red and blue wires on the charger terminals. Hopefully the two resistors will pass enough voltage to turn the controller on when it's not charging AND allow the charger to drop enough voltage to disable the controller when it's charging. I'll update this review with my results when I get the resistor. Another annoyance unrelated to the charger itself is the lack of information on where to buy an additional remote LED display. I ended up buying the remote directly from Lester but had to ask them for it because even they didn't list it on their website.