Review on Greenfilm Static Window Residential Automotive by Jake Yap

. More than a year has passed and we are very satisfied. My wife and I learned a few basic things by looking through each window from large to extra large. First, we hold the backing paper in place until the film is applied to a water-filled window with a little washing-up liquid. It is easy to put in the desired position and the water on the outside makes it easy to squeeze out the bubbles. THIRD: We then use a small hard scraper to move the water towards the outer edges of the foil. There is always time to remove the film from the areas to spray more solution. If the film slips on itself, simply pull and peel off with no hassle. FOUR: We've found that trimming the top and sides makes the job a lot easier. We leave an extra inch at the bottom that can easily be trimmed off. We made our last eight 27x27 windows in under twelve minutes each with no problems. Since the film is not yet mounted, the right cutter is important. Don't spare a blade!