📷 SD SDHC SDXC Memory Card Holder Case with Battery Slots for Canon, Sony, Fujifilm, and Nikon Cameras Review

This item has a rubber grommet that will pop out each time you open the case. he is not bound by anything. When you finally get tired of stretching the gasket around the impossibly small lip that supposedly holds it in place and decide to remove it, the case won't close. You see, pressure from pressure on the seal is the only thing keeping the lid closed. I'm amazed that such a simple item can be so poorly designed that it has no real use or value.

Cards and batteries fit snugly, battery covers must not be left, they must be removed. The low score is by design; -1 Star: The yellow ring is actually a misplaced o-ring. Every time you open the case it falls and it takes some time to stay in place long enough to close the case. -1 star: inexpensive housing made of very thin plastic. I seriously doubt it will survive many photo trips. The latch and hinges seem flimsy and I suspect the first drop will break. All in all a great 3.99 suitcase for

Cards and batteries are stuck, you can't hold the battery covers, they have to be removed. The low score is by design; -1 Star: The yellow ring is actually a misplaced o-ring. Every time you open the case it falls off and it takes some time to stay in place long enough to close the case. -1 star: inexpensive housing made of very thin plastic. I seriously doubt it will survive many photo trips. The latch and hinges seem flimsy and I suspect the first drop will break. All in all a great 3.99…

Excellent case in terms of value for money. There is another review here that says this case is flimsy and the seal falls off. Yes, the yellow ring is a gasket, but it can only be removed by pulling. It must be able to move freely in order to seal the hull. It works well. As for sloppiness, not at all. Robust material, metal hinges with fasteners made of the same material as the body. Modern materials are very durable. It includes two spare EL-EN 15 batteries and three QXD memory cards. Nice…

Batteries do not fit properly. I mean if you have batteries and cards it won't close properly. It feels too tight and when you close it feels like there is a tight/closing pressure on your cards. and you don't want it In this case, a heap of thin pieces of foam is obtained. I suspect you'll need to adjust the spacing between the items you want to insert. They cause trouble and fall everywhere. Even if you line them up to match your batteries, they'll still fall out. Nothing stays in place and…