Header banner
Revain logoHome Page
beffkkip discharge integrated charging boosting logo

Beffkkip Discharge Integrated Charging Boosting Review

5

·

Very good

Revainrating 5 out of 5  
Rating 
4.8
🚪 Garage & Shop, 🔧 Automotive Tools & Equipment

View on AmazonView on ЯM

Media

(4)
img 1 attached to Beffkkip Discharge Integrated Charging Boosting
img 2 attached to Beffkkip Discharge Integrated Charging Boosting
img 3 attached to Beffkkip Discharge Integrated Charging Boosting
img 4 attached to Beffkkip Discharge Integrated Charging Boosting

Description of Beffkkip Discharge Integrated Charging Boosting

4 in 1 Charging + Discharging + Lithium Battery Protection + Battery Level Indicator Module. Lithium battery protection function: over-current, overvoltage, over-temperature, short circuit protection. MCU users, if you accept a small load KEY can be connected to the microcontroller about 20s to provide a low level allows the module to continue working. Trigger mode: low level trigger (ground). In discharge mode (The charging mode KEY function is invalid), trigger the KEY port once to open the output; continuously trigger the KEY port twice to close the output. The first time the load is connected, the output is automatically turned on. If the load is less than 50MA, the output will be automatically turned off after 30 seconds; if the load is greater than 50MA, the output will be automatically turned on. Allow discharge while charging. (Note: At this time output voltage 4.7 / 5V).

Reviews

Global ratings 5
  • 5
    4
  • 4
    1
  • 3
    0
  • 2
    0
  • 1
    0

Type of review

Revainrating 5 out of 5

Well wake up. for power accessories

It was just right for my use, I connected a battery to it and an output to the Bluetooth board amplifier and a USB-C jack on the input to connect the charge the battery when I need it. It's very small so I can keep it out of the way as long as I can get to the power button. 100% recommended.

Pros
  • Lots of positive vibes
Cons
  • Big and bulky

Revainrating 5 out of 5

Great for all kinds of projects

These loaders are great. They are a good size, clearly labeled and work well for their intended purpose. I've tested all mine and they all worked with no issues, charging the Li-Ion battery properly when plugged in but providing power whether plugged in or not through the battery for my needs. They work great so I would recommend them to others.

Pros
  • Great for me
Cons
  • Little things

Revainrating 5 out of 5

They seem to do exactly what they say. Charge status LEDs are a nice bonus

Using a 18650 battery in the battery port and a 5V inductive charger (or any 5V source here) in the charge port it charges 18650. 4 LEDs is good . Each represents 25%. When your low battery starts to charge, the first LED (25%) will flash until the battery is over 25% charged, then it will light up and the next LED representing 50% will flash, after 50% charge it will light up. you have the idea As soon as all LEDs light up, the battery is fully charged. Auto on/off is ideal as long as your…

Pros
  • Good price
Cons
  • Easy maintenance

Revainrating 5 out of 5

Charges a 3.7V lithium battery with a 5V input voltage and boosts the output voltage from 3.7V to 5V.

Nice little board. With an input voltage of 5V, the board will charge the lithium battery at 3.7V. If you remove the 5V input, the board will step up the 3.7V voltage from the battery to an output voltage of 5V. This is a charger and an amplifier a board. There is not much information about this board but it looks like it is a clone of the IP5306 that I showed in the photos. The picture Revain has shows a 200mah battery but I used it to charge my 5000mah battery which I also bought from Revain,

Pros
  • Price
Cons
  • Expensive

Revainrating 4 out of 5

Good regulator, gives out 5V when charging

This is a good device that takes on the task of charging a lithium battery when connected to a power source and provides the circuit with regulated voltage from the battery, when there is no power source. accessible. The behavior is similar to that of a laptop battery. Charges when connected to the network and powers the laptop when not connected to the network. In both cases, the laptop can continue to be used (with or without a power supply). This block works the same way. Your circuit will…

Pros
  • Dope 🔥
Cons
  • There are problems