Bissell Liftoff Cleaner Hose Attachment - 27F6 35K3 73H5 94Y2 Review

The exchange was very difficult. Lots of screws, two different screw sizes, so you have to remember which screw goes where. I wouldn't recommend it to anyone who isn't good at puzzles. That being said, I'm an engineer and it took me about 45 minutes to do this. I ended up taking apart a few things that didn't need to be taken apart in the end. Just to understand how to analyze it. Now that I've done it, I could do it again pretty easily, but it was hard the first time. If anyone is trying to do

This replacement tube fits perfectly. I had to remove and discard the tee and just connect the hose to the existing white barb fitting. I suggest cutting and removing the old hose on the original fitting with a blade/knife. Also, using a curved screwdriver, I managed to loosen two screws from the base. We hope that the spare part will last another 3-4 years. It looks like the manufacturer was aware of the issue and increased the length slightly. In the attached picture you can see that the hose

As many have pointed out, there is no video of this. So I followed other customers' instructions (edited below for Liftoff Deluxe). Almost there, and it took about an hour to remove, swap out and reassemble the machine. I will update my review after a few uses. But I really wanted to update the replacement guide. To install: 1. Remove both tanks.2. Remove the round sticker from the hose holder. I used a paint opener and a screwdriver to pry it open. Remove 5 screws and holder.3. Remove the 3…