DKMUS Double Din Car Stereo Dash Radio Fascia Kit for Hyundai Elantra (HD), Avante (HD) 2006-2010 - Black Installation Trim Panel Frame Review

Dashboard kit fits vents, other displays and dashboards. Most looks the same as the original. The only two complaints were the fit of the kill switch and the fit on the front of the stereo. The edges of the alarm switch had to be sawn to fit the hole in the bezel. The front of the stereo system, including the frame, is actually much smaller than the opening in the front panel, so you can see the gap all around. I wish it was closer, but it's not bad.

This is a pretty decent faceplate. I used it to install the touchscreen on my wife's 2008 Elantra. Save your clips from the maker first as you will need them for them. Second, I don't really like the way the side mounts for the device connect to the front panel. Not as strong as I was hoping, but when the main unit is in, it pushes things in where they need to be. Third, loosely fasten the AC vents and make sure they are well aligned before tightening. I wanted to reinstall the whole thing and…

on the double din size block and do not cut out the factory radio frame by car, this is your best choice. I wanted to upgrade to an Android Auto/Apple Car gaming device with all the new tech, but I want to keep the OEM look and feel with a completely clean install. The best option I've found is this one. The equipment is 97% ex works, there are only negative differences that are not noticeable to the untrained eye. For example, the color isn't 100% the same gray as the factory, this faceplate…

This is a pretty decent bezel. I used it to install the touchscreen on my wife's 2008 Elantra. Save your clips from the maker first as you will need them for them. Second, I don't really like the way the side mounts for the device connect to the front panel. Not as strong as I was hoping, but when the main unit is in, it pushes things in where they need to be. Third, loosely fasten the AC vents and make sure they are well aligned before tightening. I wanted to reinstall the whole thing and the…

Fits 2008 Hyundai Elantra very well. Just a few questions and that's why I'm giving it three stars. 1: The hardware (screws) was missing so I had to find something of my own to work with. 2: The side panels intended for mounting the stereo are a bit cheap and flimsy and were difficult to attach as they weren't covered screw holes. They are open and the panels kept slipping out of the screw I put in. finally super glued, but it could all be due to the missing hardware. Perhaps the intended…

dented double din block and don't cut the factory radio frame out of the car, it is your best choice . I wanted to upgrade to an Android Auto/Apple Car gaming device with all the new tech, but I want to keep the OEM look and feel with a completely clean install. The best option I've found is this one. The equipment is 97% ex works, there are only negative differences that are not noticeable to the untrained eye. For example, the color is not 100% the same gray as the factory, this faceplate is…