🔦 DNA Motoring HL-OH-F1504-BK-CL1: Black Housing Headlights Replacement for 04-08 F-150/06-08 Mark LT - Shop Now! Review

Don't waste your money I bought two sets and both lost water after the first rain. The second set I bought I "thought" I had sealed them well with silicone before installing them, but they were still leaking. I think it has to do with where the headlight bulb screws in because unlike the factory headlight it is very loose.

Let me start by saying they look great but the metal clips need to be crimped to fit the OEM holes on the truck once installed. Also the headlight bulb socket is loose and needs an extra gasket to get a tight fit otherwise it will be loose. poor fit but overall looks good. there were also greasy fingerprints in the cases from the manufacturer, not scary, just rubbed.

Would have given 5 stars but had problems with the connections. It looks like the turn signal plugs are having trouble connecting the sockets to the wiring harness. It was very tight on the driver's side and the factory outlet had to be repurposed on the passenger side. Also, the retaining clip on the outer bottom of the assembly must be removed and reattached to the vehicle body, and then the assembly installed. Otherwise they fit perfectly and look very good.

I read the reviews and decided to give it a try and hope for the best. Excellent headlights, water does not go through! The only reason they have condensation is if you don't use your head when installing them. My LED headlights were very loose in the housing and if you leave them like that you obviously get condensation, but to fix this I removed the gaskets from my old headlights and doubled the gasket on the bulbs to make them very tight . I had no condensation and was very satisfied.

Looks good on truck, they work, but 1) fit and finish are a little off. The clips were difficult to slide through the slots on the truck, the two holes for the headlight sockets were not quite right and required a lot of work to install, and one of the sockets that the headlights came with was the wrong size and truck socket was torn (assuming you have an old socket). 2) I wanted to adjust one of the headlights, but there was no play in the adjustment screws. Just a place to adjust. That seems…

Who cares what they did. My visibility has been upgraded to factory and that is very important to me, not only for my son but because I commute to work through the deer country every day. I really like how the marker lights look compared to the original orange. I got a slightly customized headlight for less than the OEM look. Installation was very easy, the tabs looked like they could be off an eighth or sixteenth of an inch, this posed no real installation problems. In fact, in my case I…

First of all these headlights look fantastic but they are a poor replica of the real thing. They don't even come close to the quality of the original headlights. The bulb engagement is very weak and I had to put an extra silicone gasket on the bulb to get adequate moisture protection. To ensure the blocks don't leak like others have reported, I applied 3M sealant around the perimeter of the joint where the two halves meet. Also, when comparing the original headlights to these, I noticed that…

Nice product, definitely! But the installation was a nightmare. The turn signal housing connectors that came with the product did not fit my factory wiring harness connectors. On the first one I tried cutting off most of the plastic on the lamp body that came with the kit to attach it, which ended up working. However, the second time around I did the smart thing and just replaced the lamp housing from my old headlights and it worked fine. Another problem I had was that the "clip" that needs to…