Description of π Morec EV Charger Type 2 40Amp 9.6KW with APP, Bluetooth, and WiFi | SAE J1172 Standard Plug & NEMA14-50 Power Plug
Remote control: The APP of the Morec ev charging station is used to remotely control the charging process of the intelligent e-charging station (Android and IOS both available). You can use the app to control your wallbox via Bluetooth or Wi-Fi, e.g. Monitor the charging process, set the start or the end of the charging process, determine the charging power (0-9.6KW) or charging current (0-40Amp), read charging data records and upgrade firmware, etc. Full function: Delay function (up to 24 hours). if set to 0, it means it will charge immediately and the charger will stop automatically when you car is fully charged. The charging time (up to 48 hours) and the total power consumption (up to 100kWh) can also be set up via the APP. Like an alarm clock, you can set as you want and the wallbox will be initialized according to your setting. Safety:Our charging station has CSA, CE and TUV certificates. After the first connection with the APP, the six-digit password must be changed so that it is not misused by others because a cell phone can control several charging stations via the APP. Large screen and high compatibility:LCD screen shows the charging current, charging voltage and temperature. The charging station is equipped with a 6.1m charging cable and a type 1 AC plug (SAE J1772 standard) and NEMA14-50 power plug. Residual current protection: The charging station has residual current protection of type A. The charging station is safe when charging with alternating current. If you want type B residual current protection, you can buy and install it yourself.