🖨️ Effective 100ml Printhead Cleaning Kit for Epson HP Brother Canon WF-7710 WF-3640 WF-7620 8600 8610 8620 WF-2750 WF-2650 ET-2750 ET-2650 C88 Liquid Printers Nozzle - Osinkjet Review

Do not buy this set. I managed to get it working on my Epson ET-3750 but the parts don't fit together easily. All of the tubes/nozzles are the same size, making trying to fit one piece over another frustrating at best. It took over 30 minutes of determination to insert tubing and nozzles just to fill the syringe. I tried injecting the solution into the printhead while it was still installed, but ended up removing the head. Glad I did, because the pressure of injecting the solution caused the…

Received the kit hoping to clear clogged yellow ink. I opened the kit and found some strange adapters, a bottle of solution, a plastic tube, gloves, a syringe and what I felt should have been instructions. The directions were the worst I've seen and over the years I've seen some pretty bad ones. Images of something you can't see, incomplete sentences that haven't been there since. After trial and error I finally got a tube that fits onto the syringe with one of the adapters. I sucked the ink…

I bought a used Epson WF-7720 and it printed blank pages. After repeatedly cleaning the printheads and nozzles over the course of 2 days without success, I figured the nozzles must have been clogged, preventing ink flow. I tried this product and it worked fantastic, loosening and exploding any dried ink that was inside. I won't lie, the included instructions are pretty lame, but looking at the items in the box it was easy to figure out, and there's a YouTube video showing how to do it. I am…

The kit contains a bottle of cleaning liquid, a short plastic hose and 3 parts. There are no instructions on how to put them together and their shape doesn't tell what to do. By the time I got it all working, I had spilled so much cleaning solution and tried different configurations that I was flooding the collector with excess ink. It costs $26 and will be difficult to replace.

Surprise Surprise, it worked. I just wish the tube was longer. It's tight there. The first thing I did was pull out all the ink, clean the syringe with 91% alcohol, and then pour 2ml of cleaner into each nozzle. Leave on for about 10 minutes, change the folded paper towel, repeat with 4ml and leave on for another 10 minutes. Colors worked after 1 printer cleaning cycle, black after 3.

This really helped to clean the printheads. He didn't completely erase one of the four. But then we tried even more extreme methods from the internet which didn't completely fix the situation either. So, still a positive review for this product. FYI, I learned it the hard way: flushing printheads and printing test patterns takes a lot of ink. So despite the fact that this product is a good deal. I went through a whole set of color and black cartridges. for $70 which I had to replace. So over…

I had one color of ink that was particularly stuck, but I ran the cleaner through all the nozzles. The instructions don't say so, but I left the hose on the nozzle for 3-5 minutes before squeezing the cleaning liquid through. I used about 2ml per head. I also put a fresh paper towel (not blotter) under the cartridge holder every time I made a new nozzle. I then ran Epson's "Nozzle Cleaning" several times just to be sure. It may not have been necessary, but overall it got rid of the stuck ink…