Power Up Your Devices With TalentCell 24V Lithium Ion Battery Pack - Rechargeable 42980MAh With Multiple Outputs Review

Bought to use for my cpap on a 12 day backpacking expedition at philmont scout ranch in New Mexico. It worked better than expected and the crew I was with was astonished at how long it lasted.Details: using a resmed airmini on 6.7 pressure setting. Hiking at 6500-9200ft. Temps during the day were 80-90F and 40-50F at night.I bought two of these because the portable solar panels on the market could not power them and weighed 3x the battery.One of the batteries lasted me over 8 nights at 8hours…

Purchased battery and cord in March 2022 to power ResMed Air Sence 10 CPAP, charged per instructions and tested cpap operation at home got 3 1/2 nights, fine. took camping charged per instructions used 2 nights worked fine. took on road trip and had 4 nights camping, charged per instructions, would not operate suffered 4 nights, got home and checked voltage, got 29.4 vdc, usb working fine, charged everything usb I could find at home checking battery voltage and checking if would run cpap, when…

On a full charge, 12 volt output acceptable. Whereas the 24 volt output is over voltage that some equipment will not work. This was pointed out by other reviewers. Voltage does go down over time which does not do me any good. Got a DROK Adjustable Buck Boost Converter to step down the voltage to 24 volts (not sure how long this will hold up).Battery is a solid unit and seems to have good capacity. Still testing it out. But at this price, one would expect 24 volts to be within 24 volt range.

Spent a lot of time trying to find a backup for internet since we loose power often. We have a router and a modem. Both work off 12 volts DC. Yes they normally plug into mains voltage but that little block converts AC house current to DC. I have a typical computer backup but that is designed to use the battery to make AC. So it’s great for spikes or brownouts but as a backup for DC it was limited to 20 minutes since it was taking the battery (DC), converting it to AC and then back to DC. Not…

This was planned to be used for a ResMed S10 to run on while camping. We were hoping to get 4 days from the device, but on average we are seeing about 3 days of use with the air pressure set to 8 and 2 days when set to 12. No heat or humidity set. It recharges on a generator using the included power adapter in about 4 hours. This is a better solution than what we had before. We also use the comparable cable. Happy with the purchase.

Bought to use with ResMed S10 BiPAP based on reviews. First issue is having to purchase separate cable (reviews / instruction manual note the $15 cable). Second is the battery, while fully charged, did not power S10 correctly. There is split second when S10 starts (like all times with Normal power) but never turns on. So I read reviews and one said to take some power off so i tired. After several attempts was able to start S10. However through night unit stopped, I had to switch to normal AC to

This works great with our two Resmed CPAPs. You just have to get the correct cable for your machine.The Airmini needs this cable: https://www.amazon.com/dp/B09P35GD5P After three nights of camping 3 of the 4 lights were still lit!The Resmed 10 needs this cable: https://www.amazon.com/gp/product/B07RFH6JQJ This battery will provide about two nights with the humidity off.

I have a WiFi 6 unit in the basement (TP-LINK Deco X90) and wanted to make sure it stays on. The native adapter was 12V/2.5A and this backup battery worked perfectly. I've just installed it, we'll see how well it works over time.

I had to send mine back. The fully charged unit would not start my Airsense 10. I plugged it into the airsense using the special connector, and the same thing happened - one light on the bipap and then nothing.

I've purchased over ten 12 & 24V Talent Cell batteries. They have always met their specifications and have the best factory product support (Rome Jia) on ebay.

I bought this battery to feed my professional audiorecorders. Both output are very polluted and they are spoiling my recordings.

I have received the product today. Firstly I am charging the product. So at present, I can not write any review now. Batteries.

After much searching and some help from a friend I decided to buy this battery as a backup for my resmed airsense 10 autoset. Let me tell you this was a vastly cheaper then the ones's made by resmed themselves for this purpose. Now I had read in a review somewhere that the device doesn't like anything above 28 volts. Now this battery is rated at 29.4 volts and one could see where this might be a issue. However, upon getting it and charging it, I tested the voltage. I got 29.2 ok fair enough not

DC 12v signal output generates a cyclic high frequency which ends up adding unwanted noise to recording devices. Nice package and form. Everything I needed, but in the end am not happy with the noisy recordings. I am sending back. I hope TalentCell will correct this in the future. I am sending back.