Portable VSDISPLAY Controller for HSD190MEN4 and M170EN06 LCDs 🕹️ with 1280X1024 Resolution, 30-Pin Connector, and 60Hz Refresh Rate - 8541634848 Review

I bought it for the 1up arcade modding project. The only issue I had was that the HDMI cable I originally used seemed loose and didn't make a good connection at first. This led me to believe that my board wasn't working or that I had installed it incorrectly. After juggling the cord, I got a signal but was concerned that if the cabinet was hit, it would happen again. I swapped the cable and so far I haven't had any problems. If you're planning on buying one for a similar project, I recommend an

I recently bought a Partycade Arcade1up (40th Anniversary PACMAN) and needed to verify the monitor was working. The connection was uncomplicated and I was able to connect the DVD player to the monitor via HDMI. If you want to connect other devices like SNES Mini, Retropie, etc., those will work as well. If you need an additional video output for an additional screen or Elgato, I think that would work as well. I am happy with the purchase and the product has worked for what I intended.

The map is installed on my Arcade1up computer. It works well but there is a lot of noise in the picture. I've read that it might have something to do with the distance from the screen, but moving it had no effect. As for the wires, nothing special. I am not using the optional power board module and have disabled a control board that I do not need. Still noisy. UPDATE: I received a replacement and the new card works great with no noise. There was probably cold soldering on the first board. If…

I have one of the new Arcade1Up wall cabinets with a new monitor model. It does NOT work with this controller, although it's not his fault. If it weren't for that, it would be a solid set with clear troubleshooting instructions should you run into glitches. Be careful if you don't know if it will work with yours, if you have a white sticker with black text on the panel it's likely it's a newer model and you need a different controller. Find the part number (it's in the title) and you'll find a…

Great little board for my Arcade1up LCD screen. (Check if it's compatible with your display!) Just plug in and use your existing Arcade1up power cord. It allows me to connect anything with HDMI, VGA or DVI to my Arcade1Up display. Nintendo Switch, XBox 360, PS3, XBox One, PS4, Raspberry Pi, NES Mini, SNES Mini, Sega Genesis Mini to give some ideas. However, I combine this with plastic standoffs to secure the board. I would never use double sided tape for attachment. (Yes, I've seen videos…

Great product but I have a MK Arcade1UP and the inverter cable is short. During installation I short circuited the board by touching the metal case of the LCD and setting fire to the LCD's inverter board. The ETA Prime cable has a lot of slack, I ended up soldering longer wires to the inverter cable and was able to attach it to the wooden frame. Overall a great product and a must have for the Arcade1UP mod.

Shipped and arrived very quickly. Works great out of the box. Just follow the instructions in the ETA Prime video for Arcade1up. I wanted to share my experience with the hum/no noise that some people have mentioned. I had the same problem. The problem is not with the LCD driver. This is a configuration option in the Pi. I had to add a line to the /boot/config.txt file to force audio to the HDMI output. If you search the internet for "retropie no hdmi audio" you will find the answer. There are 3

Writing this review to help others who made the mistake of changing the resolution after setting up this device on Arcade1up Gen 3 screen only to get a white death screen. Though my board was burning and stuck on this white screen after changing the resolution, but there is a solution. Here's how I did it: If you have a Windows PC and an HDMI output, set the resolution to 1024 x 768 on your computer, then connect your computer directly to the HDMI input of this device and you should have a…

You don't need a "HIGH VOLTAGE!" daughter board and you can choose not to. I love that it gives you one board to adjust all monitor settings and I've actually used it to make my office monitor look a lot better from the angle I'm looking at it. Gives you HDMI, VGA and DVI plus a 3.5mm HDMI audio jack which I use to get audio from my Pi. I can't say anything bad about this product. Works as intended and is very easy and straightforward to set up and use!

Anyone who complains that there is no sound is wrong. You have not followed ETA Prime's instructions. You don't connect it to the Raspberry Pi, so HDMI doesn't work. They run a line from the controller to an external amplifier for sound.

I used this arcade 1up cabinet to upgrade to a RetroPi build. Works great with built in monitor. Works great I used mine in my arcade1up cabinet to power LCD!

I had a problem and they solved it immediately. That's all you can really ask for. The product does what it should. Thanks for attention.

Worked great with my arcade 1up mod. Very glad it comes with the necessary screw and nut to properly ground the board. Unstable connections.!

The audio on my original circuit board didn't work, I spent countless hours trying to fix it because I didn't think the problem was with the circuit board. Unfortunately I received a new board and it worked straight away. Save time and just buy another board if you can't get it working right away.

Plug and Play with Arcade1up and Raspberry PI! I'm not sure what the satellite board is for, but just throw it away and plug the little cable from the monitor into where it was connected.

It's almost impossible to get this board to stick to a chipboard. I've tried regular double sided tape and double sided Gorilla Glue and neither of them have held up. The left side doesn't like sticking to the tape. But it works and I'll buy it again.

Very easy plug and play installation. Since I had LED lighting I didn't use the high voltage fluorescent power supply that came with the controller, but the connections were the same as the LED power supply and the new combination worked 100%.

Worked great for my Arcade1up Street Fighter 2 Cabinet Mod. Even came with extra ground grease and walnut. Easy to set up and works well.

Worked great with my arcade 1up mod. Very glad it comes with the necessary screw and nut to properly ground the board. Works great worth my lcd monitor and my raseberry pie with my 1 up arcade..

Got this to change my Arcade1up. Works great and looks high quality! I only wish it had come with mounting hardware. That's my feedback.