It's almost impossible to get this board to stick to a particle board. I've tried regular double sided tape and double sided Gorilla Glue and neither of them have held up. The left side doesn't like sticking to the tape. But it works and I'll buy it again.

Bought for my Arcade1up Raspberry Pi conversion. Works perfectly, installation took about 5 minutes. Thanks for attention.

I bought this board to convert my Arcade1Up into a JAMMA 60-in-1. It worked exactly as described and has been running stable for a month since I installed and configured it.

Very happy. Turned my arcade1up into a Pandora's box using the arcade joystick I already had. Even the stock power button worked!

Perfect for the 1up mod but you get an extra part that you don't need for the 1up screen app. Kind of extra free stuff. That's a good thing, the best part is that it's free.

Anyone who complains that there is no sound is wrong. You have not followed ETA Prime's instructions. You don't connect it to the Raspberry Pi, so HDMI doesn't work. They run a line from the controller to an external amplifier for sound.

I like its simplicity. Plug in your screen, connect it to your preferred input and away you go. Just like this one. My two reeds with grounding screw and nut are included. Make sure you use it and you won't have any problems.

I got this to convert the input for my 1up arcade to connect a raspberry pi. I just followed someone's instructions on YouTube and it works as it should. I didn't even have to buy a power supply as my 1up arcade has a power supply that is compatible with it! I set aside 1 part that is not really needed in my build. Works great and the price is reasonable. Highly recommended for people who want to mod their 1up arcade machine to play Raspberry Pi.

There are a few old LCDs that haven't done anything and they've given them new life, paired them with a Pi 3b+ board and an Asus Tinker and it's all holding up great. so you can continue assembling the arcade cabinet. gotta order a few more!

IF YOU ARE GETTING STRANGE SURGE LINES, YOU JUST NEED TO LOOK CAREFULLY AT THE CABLE CONNECTING THIS NEW BOARD TO YOUR ARCADE1UP'S SCREEN. I JUST PUSH IT UNTIL IT WAS AT THE RIGHT ANGLE AND WAMMMM WAS FIRM. FOR YOUR HEALTH. caps

Uses this in a retropy setup. It works great but there is some noise on the screen which seems to be due to how close this board is to the back of the arcade LCD. So make sure you insulate it well and provide some separation between the two when installing.

I just bought this for my 1up closets to make my first mod so I can use my Pandora's box. I watched some videos, found the link for this controller, bought it and everything worked perfectly

Got this to change my Arcade1up. Works great and looks high quality! I only wish it had come with mounting hardware. Did it's job!

I used this to install a Raspberry Pi in an Arcade1up cabinet. It worked great. The contacts can be a bit delicate and I had to be careful when connecting them, but it was just what I needed. Added the ability to change the display settings to the buttons.

I have M170ETN01 1. I've used the same board before and it works. However, on this monitor, it turns on and flashes green to show the screen, then turns off and on again. It keeps running, I don't know what to do, this is the second board I've bought and still the same problem.

This worked great with my Street Fighter 2 Arcade 1up case. The only downside is that I needed a ground screw which was not included so be aware you will need your own ground screw.

Go on. Read all reviews. nobody, and I mean NOBODY will tell you what it's for. But you buy it anyway because this is America. land of waste. Donate to a local charity instead. Too bad I didn't read this review before making another stupid purchase. The children are starving.

I like its simplicity. Plug in your screen, connect it to your preferred input and away you go. Just like this one. My two reeds with grounding screw and nut are included. Make sure you use it and you won't have any problems.

Works fine, no problems. Use it on an Arcade 1UP cabinet graphics card replacement project and it works great. ill-conceived!

I had a problem and they solved it immediately. That's all you can really ask for. The product does what it should. Unreliable build quality..