Header banner
Revain logoHome Page
🧲 flexible magnetic phrozen monoprice 135x75mm logo

🧲 Flexible Magnetic Phrozen Monoprice 135x75mm Review

3

·

Very good

Revainrating 4 out of 5  
Rating 
4.0
🖨️ 3D Printer Parts & Accessories, 🏭 Additive Manufacturing Products

View on AmazonView on ЯM

Media

(4)
img 1 attached to 🧲 Flexible Magnetic Phrozen Monoprice 135x75mm
img 2 attached to 🧲 Flexible Magnetic Phrozen Monoprice 135x75mm
img 3 attached to 🧲 Flexible Magnetic Phrozen Monoprice 135x75mm
img 4 attached to 🧲 Flexible Magnetic Phrozen Monoprice 135x75mm

Description of 🧲 Flexible Magnetic Phrozen Monoprice 135x75mm

🌷【Applicable 3d printer model】The size of resin spring steel plate is 135X75mm. Suitable for any resin 3D printer with a printing platform size of 135X75mm, such as: Elegoo Mars, Elegoo Mars Pro, and Wanhao D7, Phrozen sonic mini 4k, Monoprice Mini Deluxe;. 🌷【Easy to use】The traditional DLP light curing printer platform must be removed with tools such as a scraper, while this resin flexible plate can be removed by bending.It's easier to remove the print model from the resin build surface. 🌷【Strong Adhesion】The resin steel plate surface is treated with special wire drawing, and the adsorption force is stronger, so that the model can be better adsorbed;. 🌷【High durability】The mini 3d printer resin steel plate adopts spring steel imported from USA, which has good flatness and durability; The soft magnetic stickers have strong magnetic force. 🌷【24 Months Longer Warranty】Strict testing for all components before delivery.We will provide a long-term warranty service of up to 24 months(The normal warranty period is 12 months). We will respond promptly within 12 hours in one business day. If you have any problems, such as magnetism or print size problems, you can contact our technicians to solve them at any time.

Reviews

Global ratings 3
  • 5
    1
  • 4
    1
  • 3
    1
  • 2
    0
  • 1
    0

Type of review

Revainrating 4 out of 5

Print does not stick

Installation went well thanks to a 3M magnet that sticks firmly to the standard build plate and the magnet seems strong enough not to budge in the middle of the print and to create the shift shift. My problem is that even after adjusting the home position and z-height, I can't get the print to stick to the new plate. Without the plate, I had very strong adhesion, to the point of breaking prints trying to get them off. What I noticed about the plate is that it's so smooth that the print doesn't…

Pros
  • Warranty extended 24 months
Cons
  • Expensive

Revainrating 3 out of 5

Great in concept but too much trouble for its value

So great to get lots of little things off the plate without risk of damaging the plate but to be honest I have found three main things that make this product unnecessary or even counterproductive: 1: You cannot install it without changing your printer's trigger, or it will simply crash into the screen and damage it. You will need to purchase a washer to lengthen the level sensor trigger and also longer screws to hold the new assembly in place and ONLY THEN align it properly2: The flex plate is…

Pros
  • Easy to use
Cons
  • Can't remember

Revainrating 5 out of 5

Works suspiciously well for a $15 part.

Application I:- Heat the build plate with a heat gun until warm enough but not scalding at all. I was still able to handle it with no problems - Cleaned the surface of the build plate with rubbing alcohol and a lint free cloth - Heated the 3 meter side of the magnet with a heat gun but not as hard - Glued them together - An old t-shirt placed on the edge of my desk/workbench so that two layers of fabric lie flat on the table with no creases - Place the just glued and warm build sheet onto the…

Pros
  • Strong Adhesion
Cons
  • Out of fashion